- 69 gs 8.2 rearend
- To schmooze or not to schmooze....
- right gear choice
- 8.5 posi
- 9" Ford
- 1971 2.56 gears
- driveshaft when to upgrade
- Milage and torque
- 8.5 Posi Carrier
- 12 bolt differences
- 8.5" Parts Sources
- Indestructable U-Joints
- FYI- 8.5 10 bolt in 67 A Body
- 12 bolt with series 4
- RPM changes
- matching
- 2 Series or 3 Series??
- FYI 12 Bolt users, HD yoke compatability
- 3.42 cruise..........
- How many spline
- Boatload o'fun >9 and 3/8
- Gears from an IROC
- Gears in my 69 GS
- Stock driveshaft length?
- Reasonably Priced Axles?
- backspacing
- How do I identify this BOP rear-end
- 8.2 rear problems
- Backing Plate compatability
- want low gears
- Which speedo gear do I need?
- What do you suggest for A Buick
- 8 7/8 rear end
- 1971 Gs Axle Id
- Picking up my new Rear this weekend......
- 8.2 and 8.5 Difference
- Posi
- Posi carrier ?
- Carriers
- vibration problem
- Rear end ID
- New 4.10's for 9 and 3/8th rears
- Rare stuff found in Buicks
- Open to Posi Swap
- new to the board/ gear ?
- Driveshaft to Trans Dimension
- 12 bolt stg?
- 68 Chevelle 10 bolt posi in my 66 Skylark...u-joints not lasting...
- 70 8.2 Big Pinion
- posi vs. limited slip
- Positive Traction Differential?
- Speedo gears
- U-Joint for 12 Bolt Rear
- 12 bolt posi question
- wheel studs and 3.90 gear ?'s
- Visual Clues
- 65 sportwagon 10 bolt rearend
- 3.42 Posi
- please help me i'm bummed out
- Too tight?
- How Much Is Too Much Gears
- "c" Clip Elimanator"s
- 3.73 or 4.11 Help!!!
- Rear end trouble
- Where are the #`s stamped on the `67 GS Rears?
- ratio change advice
- 2.93 posi.
- Rear Axle Bearings
- posi rear for a 72 skylark
- driveshaft lenghts
- Vibration,please help!!!
- one-wheel wonder when cornering
- Gear advice
- sounding pretty rough.
- anyone know the top end on skylark 350 2-bbl.
- how do i tell which rear end i have?
- change tire size rather than gears?
- how do you change rear axle bearings
- TH400 Driveshaft Length
- Help
- B-o-p?
- Anybody have the "no-slip" posi?
- Looking for a posi to put into my 65 skylark
- Would this fit my 72 Lark?
- I found a 12 bolt and need help with the numbers
- 12 Bolt ID
- 8.2 Axle Bearing Blues
- Limited Slip v. Positraction
- I really need a Posi...
- GM 10bolt???
- rear disc on a 10bolt
- 8.2" Axle Shaft
- setting up rear end gears
- What gears have I got?
- what have i got?
- 12 bolt???
- "00" code 3.42
- Proper Rear for 8.5 Differential Swap
- Best ratio for street/strip skylark?
- Drive shaft length
- 8.5 posi parts interchangability
- T-400 Govenor Shift Adjustments
- strange code #'s
- 12-Bolt 3.08 chevy rear Results......
- 411'S for bbb
- help needed to fix rearend
- Brake Diff?
- What rearends fit in a 69 Sport Wagon?
- carrier swap
- How big???
- 71-72 8.5" Rear Axle Seals
- Axle spline count?
- Driveshaft length ?'s for 72 GS
- If you have a '70 service manual, can you look something up for me?
- gearing question 350-4
- 1967 Buick Riviera
- 12-Bolt Chassis Advice Needed!
- Rear end clunking
- Driveshaft legth question
- posi versus a regular rear-end??
- Need help identifying part
- Did I get taken?
- Blown up rear
- Chevy rear axle width
- 12 bolt vs. 9" ford
- C Clip eliminators
- rear diff identification
- Buick style chrome lug nuts-larger studs
- Ever use a mini spool for the street?
- Can it be fixed
- Need Pinion Seal P/N - oPh?
- 67 A-Body interchange with 70 A-body ???
- 67 GS 400 rear companion flange
- 8.2" Differential questions
- CV joints on a TH400?
- Suggestions needed
- How rare is this?
- what size (in inches) is my rear end?
- Rear end swap, need speedo gear change
- 8.5''/12 bolt in G-Body?
- 10 bolt???
- I got a posi
- V6 3 speed manual ratio?
- 12 bolt rear question
- whaqt rear to use
- 4.10 rear end
- 10 bolt to 12 bolt
- Cone-Type posi
- TH 400 Heavy Duty yoke
- posi removal
- '86/ '87 GN posi rear- 8.5"
- '73 Regal rear end
- What gear should I run
- Can someone identify these pinion gears?
- Lower 2.75:1 1st gear vs. Higher Stall convertor ?
- Rear End Swap in a 72 Skylark
- '68 Riviera Driveshaft Removal?
- '68 Riviera Posi?
- 10 Bolt 8.5 rear
- universal joints
- Bushing in clutch linkage
- engine replacement
- Cool, I have a posi !
- 7.5" rearend
- Replacement Rear Drum to Drum for a 67 Skylark??
- Eaton posi unit
- "Positive" it will fit?
- 71 Centurion Rear end
- 12 bolt assembly
- Just a few 8.5 questions..
- Identifying Rear
- singing rear end in 72 gs stage1
- B body posi carrier?
- I need a posi, some many choices!!!
- Help With A 12 Bolt
- What gears?
- 12 Bolt
- whats this 12 bolt from?
- Installing Rear Gear...
- 8.5 96 roadmaster rear in a g.s
- Is my rear axle gonna blow?
- 65 GS axle bearings
- blow proof bell housing
- 12 bolt axles?
- need help on an 8.5 rear
- 10 bolt to 12 bolt swap questions
- 12 bolt ???
- 10 bolt question...
- Boattail posi/gear selection
- Wanted: Posi swap or kit for my 69 GS350
- gears or fiberglass?
- 69GS Rear end q's
- Rear swap??
- Besides stamped numbers, how do I find my rear end gear ratio???
- non posi rear end
- Losing an Axle
- Bearing caps??
- Rear end Codes
- Posi / Gear for 65 Skylark Gran Sport
- Rear end leaking on weld?
- T-Type Rear End?
- Ford 9" in the 70 GS
- The Rear?
- Question??
- 70 buick what ratio
- 3.55 GM Posi on E-Bay, $350
- How low can you go?
- 8.2" pinion seal availability?
- Did 8.5's come with bolt in axles?
- Posi and gearing setup help
- G-Body 8.5" in A-Body?
- messed up axle????
- what size is it?
- 8.2 Rear with 3.42 Posi
- 8.5 rear
- 8.2 in a 72?
- replacement axles?
- Whats the spline count?
- best C clip eliminators?
- driveshaft length measurment questions
- decoding 69 GS 400 Axel
- Driveline Squeak, vibration
- monte ss rear end?
- which rear end ratio is best for economy
- 8.5 or 8.2?
- axal code #
- 68 Olds 442 12 bolt?
- what gears to have???
- more axel codes
- gear lube ?????
- 70-72 rear axlel assy n2 66GS?
- Looking for 2:?? gears
- Cadillac Rearend gears
- 323's or 342's?
- How Strong The '72 8.5
- Help needed with rear gear identification.
- Speedo problems?!?
- stock posi vs auburn unit
- 8.2 vs 8.5
- 8.5 dissasembely instructions?
- Rear end questions
- Scored A 12bolt at the yard today!!!
- 64-68 Sealed bearing question
- How do I tell 8.2 or 8.5
- 87 8.5 Rear Axle Bearings
- Dynaflow origin
- 12 bolt went boom
- Powertrax
- Interchange
- ring spacers