Brake Master Cylinder

[JEFF STRUBE]

I have a Strange one will not work the stock Studs. Stock studs are wider in the fire wall than the strange Master Mounting.

Witch one fits with out any Mods.

Will any of the WilwoodS fit with the stock studs.

My Car is a 70 GS

[badbuik]

Jeff, I have a Wilwood one on my '65, no, it didn't line up witht the stock studs. I cut them off, and redrilled the holes, then welded the new bolts in. Good luck.

Gary G.

[10sec 455]

Jeff,
I just slotted the master a bit. On my 68 car I have an S-10 master. The studs line up on that, but you have to enlarge the hole in the firewall for the master bore.

[Dubuick]

I used one for a 69 corvette four wheel manual disc brakes it works great bolted right up :TU: