View Full Version : Plastic Pieces In Bridges
350Regal
12-20-2002, 12:51 AM
I'm working on a 1970 350 buick while cleaning it up, I seen these round plastic pieces in between the bridges. They kinda make me think they align the bridges. Well, Anyway I'm missing like 5 will this be a problem :confused: If so where should I begin to look for them and what are they called :Do No: I've also seen that the bridges with them missing shake alittle. PLEASE HELP :puzzled:
Ziggy
85 Regal 350 Build
GSXMEN
12-20-2002, 01:12 AM
If you're referring to the plastic buttons in the rocker shaft, that keep the rockers from moving side to side - contact TA Performance (part # TA 1316-1 for v8's).
Click here (http://www.taperformance.com/rockers.htm) for a description.
350Regal
12-20-2002, 01:21 AM
Do I have to replace the whole thing or can i get by with just finding the buttons at a local auto. store:confused:
GSXMEN
12-20-2002, 01:27 AM
Well...you can either order them from TA (they look to be $15), or you can try either NAPA, or maybe your local Buick dealer. Not sure how much they are there.
I would make sure to inspect the rockers and shafts for excessive wear! Also, make sure to get all broken plastic pieces out of the shaft!!
350Regal
12-20-2002, 01:31 AM
I will have to check in the morning. I did clean out all of the little peices. Most of it made it to the oil pan. Should I replace all or just the ones missing?
GSXMEN
12-20-2002, 01:43 AM
They get brittle over time! Change them all - cheap insurance. That way, you can inspect ALL of the rockers and both shafts.
350Regal
12-21-2002, 12:23 AM
Thank you all for the help :beer I found them at a whole in the wall auto parts store for 20 cents each :TU:
Ziggy
85 Regal 350 Build
GSXMEN
12-21-2002, 12:32 AM
Cool! Can't argue with that!!:TU:
Powered by vBulletin® Version 4.1.10 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.