PDA

View Full Version : Looking for '64 LeSabre drums


bambamm
10-02-2006, 11:02 AM
Looking for a source for '64 LeSabre front drums (finned)
BamaWildcat
10-02-2006, 11:35 AM
You have a '64 LeSabre? Post some pics please!

Someone on the board may have some, if not, they pop up on eBay all the time. If not, you can always buy some from CARS, Inc (www.oldbuickparts.com), which they say are "cleaned, cut, and calibrated", but they are expensive.
wildcat1562
10-02-2006, 12:04 PM
Hi Joe
i sell them on ebay when i get them
there was a place you had mentioned in the past that puts new liners in them
do you know that location off hand
if you watch ebay you know what they go for
drop me a pm and we'll see what we can do
thanks
Greg
bambamm
10-02-2006, 01:00 PM
Its a customers car.

Pretty clean four door, 300 4 bbl. AT.

The person that sold it to the lady, told her it had A/C .
I think they failed to mention it is the 4/60 style :Brow:
65Lesabre
10-02-2006, 07:06 PM
Cars, Inc has a relining service...
You might want to try Kanter Auto Products, out
of Booton NJ...800-526-1096 or check out their website:
www.kanter.com (http://www.kanter.com)
That's where I got my front drums for my 65 Lesabre.

Tom :TU:
bambamm
10-03-2006, 03:41 PM
Cars, Inc has a relining service...
You might want to try Kanter Auto Products, out
of Booton NJ...800-526-1096 or check out their website:
www.kanter.com (http://www.kanter.com)
That's where I got my front drums for my 65 Lesabre.

Tom :TU:


Thanks. I had already checked them out. I may have to order them.

She has finned drums on it (one aloy, one cast). She only cares if she can stop the darn thing
GSXMEN
10-04-2006, 12:43 AM
I have two nice ones from a 64 Electra 225. They are 45 fin drums.

I believe they are the same as the LeSabre....hopefully someone can verify that.

Asking $125 for the pair.
BamaWildcat
10-04-2006, 08:29 AM
It has been my experience that all the big cars used the same drum.
riv2x4
10-04-2006, 10:40 AM
Scott,

Put me second in line for them if they are 12.050 or so or less in diameter. If I remember correct 12.060 is max diameter for them.

Larry
bambamm
10-04-2006, 03:29 PM
Kanter is out!!!

Do you still have those drums? (maybe I should shoot you a PM :Dou: )
Wade67LeSABRE
10-05-2006, 05:58 PM
will drums from a 67 lesabre work? And yes they are finned
GSXMEN
10-06-2006, 12:27 AM
I'll have to get both of them measured to be sure.
GSXMEN
11-07-2006, 12:20 AM
My brother finally got the drums measured. One was 12.11" and the other was 12.15".

He measured from the middle. I don't know if it makes a difference which part of the surface you measure from......I would think it should be flat across.