Pic of my frame

[GS4551970]

This is the frame from my 70 Buick GS. This project started about 2 and a half years ago.Everything has been replaced with new parts High energy suspension.stainless steel brake and fuel lines. I never plained on going this far with it but once you take the body off there's not much sence of putting it back together with the old parts. I just set the body back on the frame about 2 weeks ago.What a great feeling after having it apart. My goal is to have it ready to take to Englishtown NJ over Labor day.

[68 LeSabre 4dr]

:Brow: Kevin- you da man!! Very nice . Hope you get her done by Labor day!:TU:

[Byeoffiser]

Wow:TU:

[GS4551970]

Here the body is back on the frame . Still alot of work ahead of me.The pic. in my avatar is what the car looked like before I started this project.The body only had 1 rust spot. Not bad for 33 years old.

[jeff bullock]

:TU:Don't know how old you are and I might be dating myself here, but as "Chico" used to say "Loooking Goood"!! :laugh:

[jeff bullock]

Kevin, how tough is it and what all is involved with getting the body off the frame?:confused: Jeff B.

[GS4551970]

It wasn't really that hard. A friend of mine PAT or as he goes on here bignastytoyota had done this before.He came down on a Sat. morning and by about 1pm we had the body lifted and the frame rolled out and up in my other garage. We used a floor jack to lift it.was alot easier than I expected. All the body bolts came out except 1 an it broke. besides taking the gas tank out and unhooking the emergency brake cable thats about it.

[bignastyGS]

For the record,
What Kevin forgot to show you in the pics was his wife was holding a gun on me. She told me that I'D BETTER GET THAT DARN THING DONE SO SHE COULD PARK HER CAR BACK INTO THE GARAGE! Seriously though, We have been good friends a long time and I am always ready to help out when it comes to GS's.I am really helping Kevin get this back together so I too, can go to E-Town on the same date. I purchased a totally matching numbers 71 gs 350 car for $500.00 in Sept. and am feverishly trying to get it back together. With Kevins help(painting)I should make it.I am currently building a 70 315 hp warmed engine to put in it.Though I have no physical proof, I whooped this cars butt on the track with a very small 350(think i could've beat it with 2 plug wires off....lol)When we went to pick up the time slips the computer mysteriously shut down. hmmmm? Even though Idoubted that we would be ready for E-Town,Kevin has kept after me. It looks like now we will make it.Can't wait to show that 455 my rearend with my little 350 again. ..lol


Pat aka. Bignastytoyota

[jeff bullock]

Pat it sure is amazing how well those 350's run when you throw a few carefully selected speed parts at them. Yesterday on "THE BENCH" I gave the guy from the Mopar club some crap about how we didn't need Mikes(fromTA) blue wagon to beat their Hemis and that I could do it with my little 350 Buick. Don't know if I really could or not but it sure was fun to think about. Definitely would be close though.:spank: :spank: :laugh: :laugh:

[TuBBeD]

I guess there are more members that are closer to me than I thought? Way cool:TU:

Rob

[bignastyGS]

Jeff,
My car was is a 70 GS 350 with a mostly stock 350, 2 1/2 exhaust,15 in. wheels and a 4 speed. has a few goodies though,MSD good rebuild and 3,42 rear. have to admit it though, I was on top of my game. I ran over 85 runs at the track with NO problems. best et14.56 Between us two we have owned this car for 10- 15 years or more.We have owned other same cars over the years too.It seems we trade back in forth instead of selling. Both our wives think we are totally nuts though!......lol
PAT
:laugh:

[GS4551970]

Finialy making some noticeable progress. I hope to have it all done in the next week. Then the fun starts putting it all back together again My goal now is to have it ready to go to Salem in Aug.

[GS4551970]

one more pic.

[GS4551970]

Made alittle more progress this weekend.So far I'm pretty happy with it.If all goes well hopefully by next weekend I can get the rest of the car together. The biggest mistake I made while doing this car was doing the frame first. If I ever do another the body will be done first then i'll take it off the frame. It will take alot of cleaning getting the frame and engine all clean again.I guess you learn by your mistakes.

[70lark]

Got a side shot?

[69GSCAL]

:jd: :jd: :jd: :jd: That is absol;utely beautiful!
I've very, very envious of you. What paint did you use?
What did you use to chrome your headlight bezels?
Is this your first time painting?
Do mine, do mine. Me next.

[GS4551970]

No side shot as of yet. Its just acrylic enamel with hardener. One of the headlight bezels is a NOS and the other one is a real nice used one I bought off another board member . This project was started in Aug. of 2000 I have most of the interior to put back in it yet as well as the rear bumper and side molding.

[Buick Trainee]

Kevin,

Looks real good!!!:TU:

Wish I had something that nice to drive around:Dou:

All I have is piles of parts with no car to put them on:spank:

Some day I will get something started and finished.

Maybe?

[GS4551970]

Dustin, Thanks. With all the parts your grathering i'm sure you will have a nice car.for all the longer you've been into these cars you've got a nice collection. It just takes time. And alot of work.

[GS4551970]

Made a little more progress this weekend. Still needs a little more interior work and the trunk lid installed. Then its just alot of cleaning.

[WUWU20]

Very Nice!! :TU:

[MR.BUICK]

Nice Job, Kevin. That thing looks fast sitting still!:eek2: Nice job! Looks as good if not better than professional! Nice.:beer :TU:

-Cody

[Smartin]

The front spoiler is the icing on the cake:beer

Nice car!!!!

[GS4551970]

I like the front spoilers painted the same color as the car. I think it just sets off the car so much more.

[Buick Trainee]

Once again Kevin,

The car looks real good.:beer

I will have to come check it out in the near future!

Dustin
:TU:

[GS4551970]

One more pic. My dad stopped down tonight and helped me put the trunk lid back on. Just one more thing i can check off my list.

[GS462GS]

Very nice car. Looks like you will make Englishtown in Sept. Can't wait to see the "real thing" :TU:

[mjoe7]

I really liked the job you did on the car. Very nice! Someday I would like to do a frame off resto. I like your choice of wheels. Check mine out when you get a chance. (The green one)
What size tires do you have on it? Front and back.
Are you near Lancaster PA.?
Very nice job on the car.
Mike

[GS4551970]

Mike thanks, No i'm about 2 hours north of Lancaster. I do really like the wheels. I have 275 60 s on the rear and 235 70 on the front. Your car looks pretty sharp to.

[mjoe7]

Thanks for the reply. I have a female friend coming to visit me from Lancaster, PA. That's why I asked. I might be going there soon also!
In my picture I have the same size tires as you. I resently changed the rear to 255/60 r15 to stop the rubbing on big bumps.
Happy Motoring.
Mike

[Johnno]

SWEEEEEET RIDE!!!!!!!!

[GoldBoattail455]

Awesome looking A-body! :TU:

[meanmotor74]

Wow now that is one bitchin' GS!! Way to go on the resto!

Patrick

[GS4551970]

Thanks for the complements guys. by doing the car myself i don't think i have 10,000 into it. I'm real happy with it. It wont compete with a professional done car but for my budget it will do just fine. Just last weekend i started getting my Stage 1 car ready to come off the frame. So the fun goes on.

[Marco]

Absolutely beautiful Kevin :TU:

[BuickGSXJuiced]

im in lancaster pa:Dou: