F1C on a 350 Photo

[XSPerformance]

This one is intended for a 455, but we mocked it up on a 350 just for pretty pictures.

[Nothingface5384]

looks good!

[GSXMEN]

Nice work Mike!!:bglasses:

My only comment would be on the stock ProCharger hat. I've seen noticeable HP gains when people are using the Extreme Velocity hat, compared to that one.

http://www.superiorairflow.com/EVPA-00.jpg

[XSPerformance]

Extreme Velocity hat is very nice & Procharger actually now has a hat comparable to the Extreme Velocity. So new we haven't seen it in person yet.

The hat in the photo is just an old one off our very 1st P-1SC.

[alec296]

nice setup
it would work well on my 350 if the body was back on the car

[austingta]

Is this appropriate for use on a 10.0 motor, or only lower compression? Is it available, or planned, or what?

[Buicks4Speed]

You can put it on a 10.0 motor but you need to keep the boost down or run water injection and a cam to help with cylinder pressure. How sure are you that it is a true 10.0 motor and not in the 9.5-6 range?

Nice job on the Supercharger setup!:kodak: Looks like there is alot of room to turn up the boost.

[austingta]

I'm not really sure. I have a 70 SF motor (NM) which is said to have 10.0 CR in my 'Cat and I want to do something to wake it up.

I'm just beginning the process, but I did have a GN til a few months ago, and I like power adders!

[XSPerformance]

P-1SC & D-1SC Procharger systems have been available for 350 & 400/430/455 engines for about 5 years now! A P-1SC would be plenty for that SF engine.

XS

[1drwgn]

P-1SC & D-1SC Procharger systems have been available for 350 & 400/430/455 engines for about 5 years now! A P-1SC would be plenty for that SF engine.


ummm where?

[87GN@Tahoe]

P-1SC & D-1SC Procharger systems have been available for 350 & 400/430/455 engines for about 5 years now! A P-1SC would be plenty for that SF engine.

ummm where?

HERE: http://www.xsperformance.net/