View Full Version : Question on Gauges
stg1gs455
03-19-2003, 12:11 PM
I recently bought a factory gauge cluster to replace the idiot lights I have in my 71 GS. I'm not sure on the wiring. I have replaced the sending units with the ones needed for the gauges and hooked up the wiring, but can't get them to work. Do I need to change wiring to make these work? Help!
gstewart
03-20-2003, 05:52 AM
u could have a problem with a ground. i had a similar problem with my clock . to test it , run a patch wire from the any metal on the back of the guage set to any one of the metal cross pieces under the dash . start the car & see if guages work . be sure that u have connected the wires to their proper clips on the guage set .
70lark
03-24-2003, 06:26 PM
Check this link out http://www.buickperformance.com/rallygage.htm
Powered by vBulletin® Version 4.1.10 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.