View Full Version : Ramsey Winch PTO for Dana 20
BBBB64lark
05-23-2010, 10:56 PM
Figured the Jeep Gladiator Gurus would be interested in this. E-bay item number 290438390959. You don't see many of these any more.
Macjeeper
05-24-2010, 12:52 AM
Thanks for the info!
I have a complete PTO winch bumper and drive shafts and the Dana 20 PTO from a 1963 Jeep J-200 I had 15 years ago.
Mac
northcorner
05-24-2010, 10:28 PM
While we're talking about Ramsey winches, does any one know where to get parts for worm gear winches? I have a (I think) M200 which is a 8000 lb winch. I really need the brass main gear, but I haven't been able to find one anywhere. Of course, Pierce sells every part to their winches, but so far Ramsey doesn't? Anyone??? Thanks?
swampedge
06-01-2010, 09:53 PM
I have a Ramsey PTO driven 8000# winch and every piece is still available except for the 60's 70's style u-joints for the drive shafts.
Jim
mpsvn1
06-06-2010, 12:46 AM
I will try again.
I am interested in a pto and winch that fits a jeep dana20.
I have a jeepster with a T18 and model 20 transfer case.
1) will your unit fit the transfer case?
2) what did you do about the rear cross member transmission mount--it is at the rear of the T18, therefore the lip of it extends about 2" under the Transfer case, thus it looks like it the pto will not bolt on.
thanks
Mike N
mpsvn1
06-07-2010, 01:22 AM
If anyone does have pto (and winch) available for sale -- especially the pto that will fit a jeep dana 20 (mated to an T18 transmission), let me know
thanks,
Mike N
Macjeeper
06-10-2010, 11:54 PM
Have you inquired J&W Jeep Parts in Antelope, CA near Roseville?
They have lots of J-trucks in their lot over 5 acres of Jeeps.
http://www.jwjeep.com/
BTW It didn't matter what transmission was included in vehicle for the Dana 20 PTO winch adapter.
Mac
Mine came off a 1963 J-200 I6 stepside........
swampedge
06-11-2010, 08:13 AM
The cross member has to be trimmed I believe when using the T-18. I'm running mine with a turbo 400 and a T-15 3 speed. No mods. The Ramsey PTO's are readily available if you look. The winch parts are out there but the PTO parts may not be available from Ramsey.
Jim
Macjeeper
06-18-2010, 07:42 AM
You can check this site has a good description of the Dana 20 transfer case PTO Adapter that he is looking for:
http://www.jeeptech.com/winch/d20pto.html
With thumbnail pictures and all.
Mac
1970 J-3000 Gladaitor
Suisun City/ Fairfield, CA
Powered by vBulletin® Version 4.1.10 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.