View Full Version : Back seat springs worn out? Try this.
DeeVeeEight
08-17-2010, 06:29 PM
I was able to find a beautiful back seat for my convertible on ebay for only $104.00, it was even recovered. The only problem was that the springs were soft and your butt would bottom out when you sat down. Today I went to the local fabric and craft shop and bought about 2 yards of 3" thick medium density foam, cost was about $30.00. I removed the seat bottom from the car and flipped it over on a table. I cut the foam to fit under the seat and shoved it in between the springs and lower seat frame. I did it in two sections to make it easier to install. After it was done and the seat was reinstalled I gave it a test - no more bottoming out and best of all, no funny or strange feeling. In other words, if I did not tell you, you would not know what had been done to the seat bottom.
soberarmy
08-17-2010, 07:48 PM
Good to know. I bet most of our Buicks have that problem.
batcar
08-17-2010, 08:20 PM
Also running wires across the springs and tiei them together as one works well.
r0ckstarr
08-18-2010, 02:09 AM
That's a good idea. Thanks for posting this.
gatkins2004
08-18-2010, 03:31 AM
My buckets sink a bit too maybe i can try this on the fronts as well.
miels
08-19-2010, 01:55 PM
When I recovered the seats of a 66 lincoln i owned, I bought a book on auto upholstery first so i wouldn't jack things up. Surprisingly stuffing foam between worn out springs is a common practice for upholstery clients that do not want fork out the cash for new seats completely. Another tip is if you want a softer "feel" for your seat cushions you can remove the seat covers and lay a feathered layer of cotton on the seats. This is extremely comfortable and you can but it buy the roll at the same upholstery supply stores. I paid 20 bucks for mine... Just turn the covers inside out, spray the inside of the seats with silicone (to not tear the cotton when sliding back on) and your flip them back on and secure with the clips or hog-rings and voila!
David Butts
08-20-2010, 03:33 PM
I thought this thread was someone bragging. :Brow:
DeeVeeEight
08-20-2010, 09:36 PM
I thought this thread was someone bragging. :Brow:
use your imagination.....
Powered by vBulletin® Version 4.1.10 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.