Carb spacer for Q-jet

[Ricardo Booker]

I am trying to mount a TV cable mount on my 455 intake w/ Q-jet. I found out to do this I need to raise the carb 1/2" - 1".
My question is what kind of spacer to use, one that is fully open, or try to find one with the holes in it to match the intake opening?
Does any one have a name brand or part#?
I have my 2004R on the ground just waiting to get in.

[flynbuick]

http://www.v8buick.com/showthread.php?t=219354&highlight=spacer+flow

[techg8]

I used this one

http://www.summitracing.com/parts/MOR-64941/

with a 1/4" bottom gasket (or 2x 1/8" gaskets) to get the 3/4" total height I needed to properly use the TV setup of a 200R4 on my 350.

[ubushaus]

I used this one

http://www.summitracing.com/parts/MOR-64941/

with a 1/4" bottom gasket (or 2x 1/8" gaskets) to get the 3/4" total height I needed to properly use the TV setup of a 200R4 on my 350.

I bought the same one.