Fuel line Adapter

[kack]

I have a steel pipe and will shift to Rubber Hose. ( Fuel sender from Cheyenne 1991 )
Where can i find an Adapter.
Nippel is M16 x 1.5 to 3/8" rubber hose
and M14 x 1.5 to 5/16" rubber hose. Thanks Goran :)

[bammax]

If all you're doing is connecting rubber fuel line to steel tubing than just put a flare on the steel line without any fitting. Then slip the hose over the flare and clamp it down. The only time you need an adaptor piece like that is if you're connecting a tube and a hose that are completely different sizes.

[kack]

If there are no Adaptors fiting to this, i will do what you suggested.
Looks like i have to fix two Adaptors M 16 x 1,5 to 3/8" for Fuel Filter.
All the old pipes are junk, only will use the pipes from the TBI . Thanks Goran

[kack]

Found the right Adaptors in Hydraulick Store in Town. Goran :TU: