places and prices for 350 parts

[Leo & Melinda]

i posted this once but it didnt work so if it shows up twice sorry

does anyone know where to buy an 4bl intake and headers, if so do you also know price?

I already have dual exhaust that the previous owner had installed. the transmission has been rebuilt and now has a shift kit.

[buickdav]

Welcome aboard,

if you want new parts check TA performance( http://www.taperformance.com/)or Poston. they both have what you need,i have seen a lot of 350" TA aluminum intakes out there. if used is what you are looking for then just run down to the parts wanted section at the bottom of the page and toss out an "ad". you may get lucky and find someone that is moving up or upgrading to a 455".

good luck and again,welcome aboard..........


later............................................. .......

[FJM568]

Other than the stock cast iron 4 bbl intakes, there are only 2 aftermarket alum intakes for the 350...

TA Performance has one for $279
Poston's has one for $269
Those two intakes are different intakes...

As for headers, you basically have the same 2 choices...TA Performance or Poston's...TA's are between $270 and $290...Poston's are $309 to $329...I don't really know the which ones are better...

TA Performance also sells just the header flanges so that you could actually make your own...I think the flange kit is like $75...

Hope this helps...

[Leo & Melinda]

thank you for the info TA performance is a great site and so is this

[brblx]

hooker makes 350 headers as well, for around 300.

[72skylark]

as for a used stock intake, I paid $30 for mine, and it cost another 30 to ship it.... wieghs like 50 figgin' pounds.... I'll be swapping a TA one on in about a month or so, so mine will be up for sale then, if you plan on waiting to buy one.... same price I paid, $30+shipping.... but won't be till atleast the end of september.... otherwise I'm sure you can find one out there pretty easily.

[gelcoat]

I've purchased from both companies. T/A is in Phoenix and Poston is in Alabama? The turn around and quality of parts (seems to me) is superior from T/A. They've even called me on a Saturday afternoon to answer my questions. Just my opinion.