Need skirts for 69 Skylark

[69455lark]

Hello does any one know where I can get a set of the side skirts for a 69 Buick skylark fI think 68 will work too if so how much I have some GS parts maybe we can trade :3gears:


Thank you
Richard

[beckmanb]

I have two sets. One has been dipped to bare metal and the other is still original. The dipped ones have some minor rust on the legs - the others I am not sure about. I would sell them but don't know how much. I am in Canada and could ship ups. Do you need the chrome also? ps They are from a 68 ...

[Daves69]

Richard
I have a pair I will sel for $25. PM me if you are interested.

Dave

[69GS400s]

Dave - aren't all skirts '68 ??

[69455lark]

arent the body style of the 68 and 69 the same except for some of the chrome mine,s a 69 Custom my friend has a 68 the only difference i can see is the side marker lights and the three chrome strips on the front fenders :3gears:

Richard

[Daves69]

Alan,
These skirts came from a 69 skylark custom and have the chrome trim to match the skylark body side mouldings.

Dave

[69GS400s]

Alan,
These skirts came from a 69 skylark custom and have the chrome trim to match the skylark body side mouldings.

Dave

.....interesting because in all my '69 documentation I've never seen it referenced as an option. Its also not pictured in any photo's in the Features manual.

Richard - 68 and 69 are very similar but there are subtle differences. All 68's had vent windows, only '69 special Deluxe and GS Californias had them in 2 door models. Front fenders received different trim for the two years and as you mentioned 68 had round rear markers vs. the 69 rectangular ones (the rear quarters are actually indented to recess the marker....68 Repro's were never available....). Rear trunk trim is also a major difference as well as the GS hoods between years. 69 Rear bumpers have a reverse light in the upper center while 68's dont. Those are the major body differences.....headlight bezels, grilles and chrome surrounds, vinyl top trim, wheel center cap(and hubcap) emblems differ....alot of small stuff too.....

[painekiller]

make sure you get all 6 brackets or the skirts wont work right. on each side there are 2 on the lower wheelhouses and 1 on the upper lip.

[69455lark]

Thanks I didnt even think of the connectors arent they part of the skirt I know my car does'nt have any connectors I figured I could just maybe fabricate something. The rear fender well has a one inch piece of metal that is holding a chrome piece. that is where the top of the skirt would fit. the chrome piece would come off since the skirt has its own chrome :Dou:

thank you

Richard

[painekiller]

Richard all cars have the 1" lip, but if the car had skirts there is a bent piece of angle iron that the skirt connects to. the lower brackets arent too hard to find but the upper ones are harder. i have a set of the lowers but no uppers. i think my dad has a complete set of the brackets that he may want to sell.

[69455lark]

OK ill PM you, just as soon as I receive the skirts from Dave. This site is very helpful I have alot more questions mainly about the 455 and the th-400 once again thanks for the information it seems that this type of information is getting harder and harder to find, just like good parts at a junk yard.

Thanks
Richard
:3gears:

[69455lark]

dave forget the skirts I found a pair in the used parts for a hundred dollars its not 25 but i guess one has to do what one has to do.

Thanks anyway :3gears:

[69convertible]

[QUOTE=Daves69]Richard
I have a pair I will sel for $25. PM me if you are interested.

Dave,
I need the pass. side mainly but I will take both. I want a show quality pass. side though as mine has a small dent. Is it sweet? Don't mind to pay for shipping, etc.
Thanks,
Jim

[Daves69]

Jim,
I will check condition of the pass side skirt.

Dave