Clutch Pedal hits wiring

[71Stage1Conv4sp]

Maybe I am jumping the gun, but, I just put the pedal assembly together and noticed that when the clutch is fully depressed it hits the wiring cable along side of the fuse box. It may not be a problem when the tranny and engine are in. Does anyone have some photos of under the dash that I can use to verify my wiring?

Thanks.

Len

[flynbuick]

Len

Is the rubber bumper on the pedal assembly?

[71Stage1Conv4sp]

Jim;

It is the wire and rubber casing along side the fuse block. I removed the firewall insulation and reinstalled the fuse block. It seems to be alot better. I don't think it will make a difference once the clutch assembly is complete. I did install a new bumper on the top of the brake pedal assembly though.

Thanks.

Len