Anti Roll Bar

[bigdawg70]

Does any one make a anti roll similar to the one they sell for the abody cars that weld in to the g body cars. I thought there might be a universal set-up but i cant find one. Also does any one have one on there car? how well does it work?

[10sec 455]

A.R.T. "applied racing technologies" makes a very nice unit. It was probably the best one single thing I have done to the car. wwwappliedracing.com

[GRNDNL]

Wolf and HR Parts N Stuff both sell a nice adjustable bar......

[alec296]

i have a competion engineering anti roll bar welded to the rear axle tubes
and mounted inbetween frame rails. summit sells it as a universal.
it is in a g body regal with 10 bolt 8.5 rear.
andy

[bigdawg70]

I look on the applied site and couldnt find it Hr parts n stuff website isnt setup the same way. Does wolf have a website. Alec do you have tail pipes on your regal if not is that set up long enough to go through the trunk and weld to a roll cage ive seen them set up like that on the gs eliminator cars

[stg1dom]

http://www.wolferacecraft.com
http://hrpartsnstuff.com

I am currently using the adjustable, bolt-in kit by HR Parts and it works really well.

[10sec 455]

Does any one make a anti roll similar to the one they sell for the abody cars that weld in to the g body cars. I thought there might be a universal set-up but i cant find one. Also does any one have one on there car? how well does it work?

I have part #018662 on the appliedracing site. I just checked it and it there, welds to the roll cage like you discribed above. :Do No:

[bigdawg70]

thanks alot now all i have to do is see if i can get it to work with the full exhaust

[alec296]

i dont have tailpipes on mine but it looks like you could get some in there
but you would need custom ones as it would need to come in tight to
the center. the kit from summit looks like the arms can be moved inward
to get tails ,mine are welded to the bar already so they are permanent.

andy

[10sec 455]

thanks alot now all i have to do is see if i can get it to work with the full exhaust

Mine does, 3" TA tailpipes. Dick miller makes a nice unit also. robsbuick has a setup like that.

[bigdawg70]

how much difference in your 60ft have you guys noticed?Does the car leave any better does it actually stop cork screwing

[Dennis Halladay]

I had a 79 regal that gave new meaning to corkscrewing, we have video with it on the right rear tire only with the left front 6' in the air. I built my own anti roll bar for it and it came out with even air under the front tires, I don't think it hooked as hard but the 60' was quicker since I didn't have to lift to keep it in my lane. The bars made with a moly tube instead of a solid center shaft have some flex and I think work better, mine was too rigid.

[10sec 455]

Picture sucks , but it fits with full 3" exhaust.

[texas ranger]

Jeff, Do have a picture of the bar from the trunk?

[10sec 455]

The car is packed away right now, but I can get you one.

[texas ranger]

Thanks Jeff. :TU: