Parting out a 72 GS 350

Discussion in 'Car Part-Outs' started by RACEBUICKS, Mar 8, 2013.

  1. RACEBUICKS

    RACEBUICKS Midwest Buick Mafia

    Still to cold to play outside but I took a couple more pictures
     

    Attached Files:

  2. justalark

    justalark Silver Level contributor

    Mike.......when you are able, I really need the fuel pump to carb gas line if its intact....don't care what it costs to ship.
    Gene
     
  3. angelorayhurst

    angelorayhurst Well-Known Member

    I pass on the door panels:TU:
     
  4. Doo Wop

    Doo Wop Where were you in '62?

    Gonna pass on the hood.

    Board member speedygump may be interested.
     
  5. mrolds69

    mrolds69 "The Cure"

    Might be interested in the tach if it's nice.
     
  6. RACEBUICKS

    RACEBUICKS Midwest Buick Mafia

    whats this little bad boy worth? ;)
     

    Attached Files:

  7. jeffpye

    jeffpye Well-Known Member

    Can we talk motor? What was the reason for it sitting since 1990? Was it engine related and if so, what shape would the block and heads be in?
     
  8. RACEBUICKS

    RACEBUICKS Midwest Buick Mafia

    Car was wrecked and the frame was bent so they parked it. I have not done much to the engine to see if it was even free.

    ---------- Post added at 09:16 AM ---------- Previous post was at 09:13 AM ----------

    I cannot get power to the car to see if it works at this time. The key wont rotate in the column so untill I get it off to floor check it I cant tell. sorry

    ---------- Post added at 09:17 AM ---------- Previous post was at 09:16 AM ----------

    No bracket and drive shaft would be $40 or so to ship maybe more because of length

    ---------- Post added at 09:18 AM ---------- Previous post was at 09:17 AM ----------

    Its beige/ creame colored
     
  9. RACEBUICKS

    RACEBUICKS Midwest Buick Mafia

    The drivers door panel is not that great the passenger side looks better than I thought.
     

    Attached Files:

  10. RACEBUICKS

    RACEBUICKS Midwest Buick Mafia

    It has black seat belts and the ones I see are decent but would need to be cleaned for sure. I would pull them all out and ship them for $65 if that works let me know. Also if I find they were all consistant in that description work that out too.

    ---------- Post added at 09:28 AM ---------- Previous post was at 09:27 AM ----------

    Emblems are all there most have some type of pitting on them I usually get $75 for a full set of these. (grill sides and decklid)

    ---------- Post added at 09:29 AM ---------- Previous post was at 09:28 AM ----------

    The intake would be $50 plus about the same to ship (until its pulled Im guessing)
     
  11. WV-MADMAN

    WV-MADMAN Well-Known Member

    Whats the price on the door panels front and back?

    Also the hood/breather...

    If it gets to me:pray:
     
  12. RACEBUICKS

    RACEBUICKS Midwest Buick Mafia

    Not real good to be honest. The air cleaner is on ebay with the hose and the interior corners are not going anywhere if they are good. I need a set too. Ebrake handle should be ok on the next trip out I will look at it.
     

    Attached Files:

  13. RACEBUICKS

    RACEBUICKS Midwest Buick Mafia

    Both are not good sorry

    ---------- Post added at 09:37 AM ---------- Previous post was at 09:36 AM ----------

    Door panels are listed above and the dash pad looks liek a good one once its cleaned. $75 plus shipping

    jimzturbobuick has first dids on dash pad I see sorry about getting out of order.
     

    Attached Files:

  14. RACEBUICKS

    RACEBUICKS Midwest Buick Mafia

    It is packed with rats nest right now. Once its off the trailer I will see what it looks like.

    ---------- Post added at 09:46 AM ---------- Previous post was at 09:39 AM ----------

    After the hood is repaired I plan to sell it complete

    ---------- Post added at 09:47 AM ---------- Previous post was at 09:46 AM ----------

    Still never answered my question hidden style or above crome style I should have both.

    ---------- Post added at 09:47 AM ---------- Previous post was at 09:47 AM ----------

    no tach

    ---------- Post added at 09:49 AM ---------- Previous post was at 09:47 AM ----------

    The air cleaner I stuck on ebay yesterday with lots of pictures The hood needs a little repair and I was going to do that before I sell it. All the door panels should still be worth $100 as a package
     
  15. Redmanf1

    Redmanf1 Gold Level Contributor

    Is the pass side door glass clear?

    air cleaner support?
    Alternator?
     
  16. RACEBUICKS

    RACEBUICKS Midwest Buick Mafia

    Glass is tinted, support is on eBay with hardware and the altinator is still there. What part number are you looking for?
     
  17. WV-MADMAN

    WV-MADMAN Well-Known Member

    Im interrested in the panels...

    Is the driver side panel straight? I cant tell from the pics, and I dont care about the loose carpet.

    Are the rears good?

    Also, what would you take for the speedo?

    Shipping to 25276?
     
    Last edited: Mar 13, 2013
  18. Redmanf1

    Redmanf1 Gold Level Contributor

    1102448 55A

    Thanks
    Nelson
     
  19. RACEBUICKS

    RACEBUICKS Midwest Buick Mafia

    $25 for the speedo I have a half dozen of them. The drivers side is warped I wasnt so sure I couldnt wet it down and lay it flat with books on it for a day or two to save it.

    ---------- Post added at 08:13 PM ---------- Previous post was at 08:13 PM ----------

    Will check it out as soon as I can
     
  20. jimzturbobuick

    jimzturbobuick Well-Known Member

    Thanks, will pass on emblems, mirrors, dash pad,
     

Share This Page