Parting out a 1965, 66 and 69 Skylarks

Discussion in 'Car Part-Outs' started by kburras, Mar 12, 2013.

  1. kburras

    kburras Well-Known Member

    Let me know what you need.... THE 65 FENDERS ARE SOLD!!! The hood BUICK letters are sold!!
     
    Last edited: Mar 15, 2013
  2. kenm455

    kenm455 Gold Level Contributor

    65 STUFF
    taillights if not pitted.
    working console tach
    tinted glass,only need a couple pieces to complete a set
    tilt floor shift steering column
    hood emblem if not pitted
     
  3. Clanceman427

    Clanceman427 Hardtops need not apply

    1965 is it a 2 door? Hardtop or post?
     
  4. kburras

    kburras Well-Known Member

    I just sold the taillights and the Hood emblem letters that I do have are missing studs. What pieces of tinted glass are you needing??
     
  5. htrdbuick

    htrdbuick Gold Level Contributor

    I'd be interested in rear quarter patch sections if your's aren't too rusted
     
  6. kburras

    kburras Well-Known Member

    I 'm sorry but I should of stated that the 65 and 69 Custom are 4 doors. I did change the ad.

    ---------- Post added at 01:07 PM ---------- Previous post was at 12:59 PM ----------

    Sorry but I should of specified that the 65 and the 69 are 4 door.

    ---------- Post added at 01:08 PM ---------- Previous post was at 01:07 PM ----------

    Which one are you interested in the quarter patches for????

    ---------- Post added at 01:15 PM ---------- Previous post was at 01:08 PM ----------

    I just sold the taillights and the Hood emblem letters that I do have are missing studs. What pieces of tinted glass are you needing??
     
  7. 66BulldogGS

    66BulldogGS Platinum Level Contributor

    How do the doors look on the 66, most interested in the driver door, but possibly both?

    Was it a auto or 4 speed car? If 4 speed, is the short console and/or consolette still there?

    Since you listed them as Skylarks, I assume the 66 doesn't have a 401 sitting in it, if the motor is still present. If so, might be interested in that as well.


    Thanks!
     
  8. kburras

    kburras Well-Known Member

    There was a running 300 in it and as soon as I got the car home someone bought it!! It was an automatic. I will take some pics of the doors and post them in a little while. Thanks, Kimberly
     
  9. kburras

    kburras Well-Known Member

     
  10. Buicksky

    Buicksky Gold Level Contributor

    69 parts whats the core support and rt inner fender look like ? Also Rt fender. Tony
     
  11. kburras

    kburras Well-Known Member

    Tony, The radiator support and right inner fender have rust through under the battery like most of them do and the right fender doesn't have any rust through but does have some old body repair in the front by the headlight area. If your interested I can send some pics. Thanks, Kimberly
     
  12. 69GS455

    69GS455 69 GS 400

    What tail light lens does the 69 have? I am looking for the right side lens with the dual silver stripes on it. Also do you have any of the hood letters for the 69?

    Thanks
     
  13. 197064buickspec

    197064buickspec 1964 Special Post-455

    Does the 65 Skylark have wheel opening moldings?

    I would be interested in all of this,

    Wheel opening moldings
    Dash pad if not cracked
    Center emblem in between the tail lights i both upper and lower tab is intact.

    Also is any of the 300's have a 4 barrell intake? I need one of those.

    Thanks.

    Brian
     
  14. kburras

    kburras Well-Known Member

    The 65 didn't have any wheel openings moldings. I sold the dash pad already and non of the 300's had 4 barrel intakes. I do have the center emblem but there are some pits. Parts 079.jpg Parts 080.jpg Parts 082.jpg If you want the emblem you can have it for $30.00 plus shipping. Thanks for your interest, Kimberly
     
  15. woodchuck2

    woodchuck2 Well-Known Member

    I may be interested in both front fenders off the 65 if they are not rusted, dents are not a big concern.
     
  16. gs66

    gs66 Silver Level contributor

    There a good dash pad in the 66?
     
  17. kburras

    kburras Well-Known Member

    I have a good right side lens without the stainless strips. I do have the hood letters for the 69. All the letters are really nice except for the I.
    Parts 033.jpg Parts 034.jpg Parts 035.jpg Parts 036.jpg Parts 037.jpg

    Thanks, Kimberly
     
  18. kburras

    kburras Well-Known Member

    the fenders for the 65 have been sold!!
     

    Attached Files:

    Last edited: Mar 13, 2013
  19. kburras

    kburras Well-Known Member

    The dash pad in the 66 is toast. Thanks for your interest, Kimberly
     
  20. Buicksky

    Buicksky Gold Level Contributor

    69 parts how are the rear wheelwell trim? full size or short?
     
    69ST1BW likes this.

Share This Page