Dirty Bulkhead Connection Question........

Discussion in 'Wrenchin' Secrets' started by Paul Stewart, Mar 30, 2018.

  1. Paul Stewart

    Paul Stewart Well-Known Member

    Took the engine side of my bulkhead off and there is a bunch of dirt in there. What can I safely spray it with to clean the connectors? Mass Air Flow cleaner or ?

    Thank you!
     
    Paul Stewart, Mar 30, 2018
    #1
  2. Mark Demko

    Mark Demko Well-Known Member

    I think Brake Kleen/Clean would work
     
    Mark Demko, Apr 12, 2018
    #2
    woody1640 likes this.
  3. Paul Stewart

    Paul Stewart Well-Known Member

    I used MAF cleaner and it worked great. Had the same make-up as electrical cleaner..............
     
    Paul Stewart, Apr 12, 2018
    #3
  4. woody1640

    woody1640 Well-Known Member

    And use an air blow gun to dry it and you should be good (you may need to scrub a lil with a brush depending).


    Keith
     
    woody1640, Apr 12, 2018
    #4
  5. bostoncat68

    bostoncat68 Platinum Level Contributor

    bostoncat68, Apr 12, 2018
    #5
  6. CJay

    CJay Supercar owner Staff Member

    Usually when you take that connector apart, there is thick dark colored grease in there protecting the connections. Looks like thick molasses.
     
    CJay, Apr 13, 2018
    #6
  7. Eric Aull

    Eric Aull Member

    Eric Aull, Apr 21, 2018
    #7
    bostoncat68 likes this.

Share This Page