1970 skylark floor shifter missing parts

Discussion in 'The "Juice Box"' started by brands5.0, Jun 21, 2018.

  1. brands5.0

    brands5.0 Well-Known Member

    Kicking my self for a 20 year old mistake. I took the shifter and console out of my first car before I sold it for scrap. I have had the shifter and console through every move I have made. I finally am staring to work on putting the interior back together and noticed I am missing the bar and arms that select the gear. I am guessing I will have to fabricate these parts. Any leads on if these parts exist?
    633D8704-899B-44F5-A18B-38893FDEE132.jpeg

    0E38E773-5CA9-44DD-B99F-BC4A6992C27A.jpeg
     

    Attached Files:

  2. Stage 2 iron

    Stage 2 iron Platinum Level Contributor

    The parts place has the bars you're looking for for $59 And probably anything else you're looking for your automatic Console.
     
  3. brands5.0

    brands5.0 Well-Known Member

    That’s what I was looking for thank you. Was not sure if it came with the bar and sliders.
     
  4. Stage 2 iron

    Stage 2 iron Platinum Level Contributor

    Yes it with bars an sliders glad I could HELP. thanks a really nice console you have there.
     
  5. brands5.0

    brands5.0 Well-Known Member

    Thank you. Now it will be close to perfect. I just ordered all the parts to restore the shifter.
     
  6. Raymond levesque

    Raymond levesque Raymond Levesque

    I am looking for the detent parts for my 69 skylark floor shifter. I went to the parts place website and there were none of these parts listed for the 69
    mines got this chincy plastic lever and the mounting tabs are broken /worn off.
    I could drill and tap or replace or make the plastic piece...
    Are all the floor shifters the same or is every year different?
    Also is there a service available to restore the shifter?
    It's a 69 GS 400 with a TH 400 transmission.
    Thanks
     

Share This Page