1970 GS350 Survivor

The second owner that I tracked down sent these photos to me today. The trailer hitch towed a small bass boat. Say no to whitewalls unless they are pinstripes !

 

Same wheels. Belted Wide Ovals. Better look !

 

Is the hitch still on it? I don’t see it in first post. Do you still have it?

 

Owner number two took the hitch off . It is a Kia Sorento now .. Or maybe a Hyundai .. Recycle .

 

Do you have any pics of how it was installed? I have one that bolts to frame and through bumper. I also had one that bolted to frame that used the factory holes in the bottom of the bumper.

 

It went into the frame and also into the bottom of the bumper . I can see the holes they used to mount it.

 

Yes, that is like the one I had. I wish I had it back

 

I love Rally wheels with white wall tires : the perfect touch of "class" !
I will replace my white letters tires with white wall too.

 

Now look what you caused ostrich,,,
is this a flint car ?

 

NO,, Leeds built 6/1970

 

So, copper cotter pins on the center link, and steel on the other positions ?

DL

 

Don, here's an old post from when I was researching this.
http://www.v8buick.com/index.php?threads/copper-cotter-pins.287660/

 

I was just confirming what was on Scott's car. kinda hard to tell from the photos. Not the centerlink ones

 

My car has copper in one end of the center link at the idler arm. The end at the Pitman arm has a steel cotter pin . Those four pins are peened over like the ones seen in the clear close up photos . Not on the lower ball joints because they and the upper control arm bushings were replaced . TPP has the copper pins at $ 29 for a set..

 

This is for Jason. Non cogged belts. GM . Thanks for the comments. LOL.