455 Parts for High Performance

I just bought a bunch of stuff over the week and I'm keeping what I need and selling the rest so here we go.


455 TA Performance Main Girdle and Oil Pan both these parts need some cleaning up, there is rust inside the oil pan, if I clean it up the price goes up. $550



Arias Blower 4.320 Pistons(9) with rings. These are supposedly mopar pistons that can be used in our engines with modification. $500





Now we have supposedly mopar connecting rods, I believe to be after market or machines(8). $200


1968 big port 430 stage 1 heads with port and polish I'm looking to get around 1k for these but after I look them over better and possibly get some flow numbers I'll put a permanent price.

 

Interested in the crank. Let me know what you want for it.

 

In line on heads, pending more info

 

I have one person in front of you but youre up next if they pass when i decide on price.

 

Just as well jump in line on the crank

 

Does this crank look familiar to anyone?

 

Inline for the crank if it gets this far.

 

TA has mainly sold 4.400 stroke cranks. That said, it could well be a Crower bought through TA. If not a Moldex.

This is assuming it is a 3.250 main and 2.200 rod.

Is the stroke stamped on it, were you told 4.400, or did you measure?

 

It's stamped with 4.4 on the crank

 

Can you post a picture of the 4.4 stamp on the crank maybe JW can help identify what manufacturer the crank Is.

 

As per the board rules you need to list a price for the crank.

 

Thanks for adding a price for the crank, all good.

 

I will jump in line if the crank gets to me.Thanks. Tommy.

 

This a Moldex Billet Crankshaft, I contacted Moldex and they confirmed it. These cranks are almost 4K brand new with a waiting period of months up to a year.

The list price is 3k w/ shipping or pick up 2.7k

 

Yikes!!! It's still a used crank that has some obvious damage and not 100% sure of what you actually have. I'm not saying it's junk but still a gamble to the buyer. GLWTS

 

I understand its a big price tag, but how many are out there for sale?

I'm willing to do trades and cash because I need a lot for my car.

I need the following:
TA Timing Cover
Rear GS Spoiler
Power Steering Pump Brackets and Pulley
Top A/C Bracket that attaches to the manifold'
Full Passenger Side Quarter Panel(maybe even both quarter panels)
Stock Oil Pan
GS Hood

 

Chris, Got your pm.

I'll respond here.....

I think "3k" is too much for what you have unless you really knew the details.

By the time a buyer had it mag'd , polished or ground and rebalanced you could exceed the cost of a new unit.

Good luck, if someone down the line doesn't want it for $3,000 let me know.

 

Alright, I like all you guys on here and I dont want to feel like im ripping someone off. Ill drop the price to 2.5k, anyone wants it, can message me. and remember trades are welcome with the wanted list above.