BBB Billet Cranks

Discussion in 'Our Products' started by ken betts, Oct 9, 2019.

  1. Bens99gtp

    Bens99gtp Well-Known Member

    This great news, now it just need to find a money tree to harvest........or maybe a shrub......
     
  2. ss4825

    ss4825 Well-Known Member

    Very good news indeed.
     
  3. Bens99gtp

    Bens99gtp Well-Known Member

    Cant wait to hear finial pricing,
     
  4. ken betts

    ken betts Well-Known Member

    As it stands “today”, $2,700 plus applicable tax, shipping and boxing.
     
    dan zepnick and StfSocal like this.
  5. TORQUED455

    TORQUED455 Well-Known Member

    How much does it weigh? Is it bull-nosed and knife-edged? Lightened?
     
  6. sean Buick 76

    sean Buick 76 Buick Nut

    Post some pictures
     
  7. ken betts

    ken betts Well-Known Member

    Will give all details and pics of actual cranks when they arrive.
     
    Lory's 350 and 300sbb_overkill like this.
  8. C.Rob

    C.Rob Well-Known Member

    What is the max cubic inches you could take a stock block to with your stroker kit?
     
  9. BrianTrick

    BrianTrick Brian Trick

    Will you have rod options for your stroker kits? Steel or aluminum?
     
  10. Tom Righter

    Tom Righter Well-Known Member

    Can we see a print of the cylinder head and the valve arrangement. Also I would think there would most certainly be a cast intake that would come out simultaneously with the cylinder head to make this a Affordable deal like the other manufacturers have enjoyed. I do believe these two items if done right will make the most Impact on the big block community. Thanks Tom
     
    Julian likes this.
  11. ken betts

    ken betts Well-Known Member

    Thats a good question. Based on what others have done (and I have not tried it) Some claim you can put a 4.5" stroke in a stock block and had to "jiggle" the cam and grind the block to get it in. Stock blocks are fragile over 600hp and need girdles. I am putting a complete stroker kit with my heavy duty block together. If were lucky we will have some available by May. We will offer multiple bore, cam, stroke and main cap combinations. I would call JW at Tri Shield Performance our engine builder for your requirements and cu in possibilities.
     
  12. ken betts

    ken betts Well-Known Member

    No print will be made available, but you can see and probably have seen pictures on my site and JW's V8 site, with the rockers installed. We will have billet intakes available before the cast heads come out single and dual quads. We are looking at modifying cast intakes available for other motors. We have bought equipment that I own to expedite machining of our parts. Since we are also upgrading the S1 & S2 heads now available, we will have new cast intakes for those also. In the future customers will NOT have to pay for CNC porting to have a great head.
    As mentioned we will have many complete motor kits at ridiculous prices.
     
    StfSocal, 1972Mach1, Julian and 4 others like this.
  13. sean Buick 76

    sean Buick 76 Buick Nut

    Good job Ken!
     
  14. Julian

    Julian Well-Known Member

    Will you guys have any wildcat heads on display at the Nats?
     
  15. ken betts

    ken betts Well-Known Member

    We are hoping to have, block, crank and heads, we expect John Everett to have a NA Injected BBB with Billet heads in his dragster.
     
  16. ken betts

    ken betts Well-Known Member

    UNBELIEVABLE! The first 15 Billet stroker cranks are spoken for and we barely got started on the GS Nats @ BG 2018 interest list. Any new orders will require a non refundable $1300.00 deposit. (If you change your mind at any time we will help you sell it till its gone but we will probably use it in my new blocks) We are selling them for $2,657.00. That's $1,200.00 less than what many of you paid in the past. We plan on ordering them next month so don't wait. We will also make them with 3" mains if we get 3 orders. (5 min required but i need 2)
    I have saved 2 for a complete stroker kits with everything you need for the bottom end including the highest quality roller timing set. Pistons and rods for those are in the works and hoping to get them in March. *****These kits will have further discounts than our already low prices! *****
    I have bought my own equipment to do all our parts in house. We will very soon start on our Cast racing heads, roller rockers, valve covers, intakes etc. Start planning now for your next engine or upgrades. You can email me at, "buickparts@verizon.net" with your orders and needs. We are dedicated to bringing the cost of Buick performance way down! We know it will take a while to build up stock so please hang in there. As soon as our Cast racing heads are started at the foundry we will be starting on our all new WILDCAT HEADS replacement for current S1 & S2 heads. We believe you should not have to pay for expensive porting or roller rockers to get the power you want! Thank you all for you interest and patience.
    kenny betts
     
  17. Briz

    Briz Founders Club Member

    Rumor has it I got one of the very first cranks. Should keep the momentum going and get in line for one of the complete builds.
     
  18. TORQUED455

    TORQUED455 Well-Known Member

    How much does it weigh? Is it bull-nosed and knife-edged? Lightened? Pictures?
     
  19. Tom Righter

    Tom Righter Well-Known Member

    Cylinder heads with water ?
     
  20. ken betts

    ken betts Well-Known Member

    They are here! JW should have yours mid week to check.
     
    1972Mach1 and 300sbb_overkill like this.

Share This Page