I have a 66 skylark, and I would like to make the conversion from the old style over to a new throttle cable. I know that I need a new gas pedal. But I was hoping to be able to buy a completer kit. I have a edelbrock carb. Has anybody else made this conversion ? what should I be looking for as far as kits or parts
Putting a 68 and up gas pedal is fine.one thing you have to tell us is the engine you have!Is it a 340-350 or something also.The cable comes in different lengths,also it makes a difference between 2 barrel and 4 barrel and what kind of intake you will be using..Bruno.
sorry bruno, 401 nailhead factory intake, 4 barrel thunder series 800 cfm with this new carb the kick down for the trans will not work so i bought a edelbrock adapter that goes on the choke side of the carb and when the linkage gets to a certain point it sends a signal through the kick down wire harness to trans for the kick down to activate
What you want to do will require a custom set up. Swapping over to the 68 and up gas pedal is one part, but you will need some way to adjust the cable bracket and/or cable length. I would look at Lokar cables. https://www.lokar.com/throt-cable-kickdowns.html https://www.lokar.com/mounting-brackets.html https://www.lokar.com/assets/instructions/INS0002-ThrottleCable.pdf
looks like after some research, if I was to get a 68/72 pedal it would require a separate cable that I would have to fabricate to get /hope all the stars line up, So I've decided to get the Lokar duo-pac 1000HT cable kit with brackets and a pedal assembly Bag 6129. Just for the fact it all work together and gets great reviews
I'm looking to connect T 350 to my 350 sky that currently runs a 2 barrel and ST 300. So that puts me on the hunt not only for pedal assembly/ kickdown eyelet but also for the cables for 2 barrel as well as four barrel . I hadn't realized they were different
HI Mike the goon,you will need first the downshift cable,the 70 72 gas pedal,and the 4 barrel cable with the bracket that bolts on into the intake manifold, this bracket is a little longer and a little taller then the 2 barrel.I have the downshift cable,the good gas pedal [they had 2 models of pedals]the 4 barrel bracket,I might still have a 4 barrel cable.In case you are interested,send me a PM.Bruno.