68 GS400 Sway bar bolts

I was changing my sway bar bushings and I noticed that two off the bolts had rusted bad threads. They are 1/2 inch head 5/16 x 1 3/16 long with a "E" on the head. Need help........anyone.

 

I'd contact one of the sway bar sellers like Metco

 

These are all over ebay. Some had washer heads, some didn't. Look at Inline, TPP, and others. They even make a set a hair larger for stripped holes. I would think Todd may have them, too.

 

Yea, looked at those but no head markings, mine have a (E) on the head like these;

http://www.ebay.com/itm/64-m69-Cama...ash=item43d744356d:g:AmMAAOSwk5FU0wyN&vxp=mtr

I just don't want to spend 50.00 for them.

 

my mistake, I was thinking rear sway bar..

 

The "E" won't make your car any faster, and judges don't look for that "E"! The secret is, there were many differently marked bolts, just like there were different tires, belts, hoses, etc used on the same model car.