Does anybody know how to remove the dash bezel in a 67 skylark. I can see some nuts along to bottom but what about the top? Do I have to take of the trim pad to access them or reach up from the bottom? Thanks as always Adam
You will also have to disconnect the speedometer cable and wiring harness along with the heater cable controls. You have to remove the screws holding the bezel and access those connections by laying on the floor and working from underneath. It isn't easy or fun.
Ok that's why I was thinking thanks guys I have a wringing problem that I believe is behind the dash thanks much as always
The wiring harness can be left attached to the dash. Just unplug the harness from the firewall, and remove the dash with harness together. Along the bottom edge, there is a screw above the steering column, you have to lower the column to get to it.
