Another 57 Roadmaster 75 Project

Discussion in 'Projects' started by Smartin, Jan 14, 2019.

  1. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    I hope to get started on this pretty soon. I’ve had it since MCACN, as I was in the area already and figured we would save some $ by bringing it back here at that time, rather than making another trip.

    This one will get paint and stainless, similar to the blue 57 I did a few years ago. The owner had done some detail work on the engine already, and has provided a complete parts car as well as all the parts that have come of the car to get it to this point.

    It appears to be pretty solid, with the exception of some issues in a couple of the doors, and a bit in the hood lip.

    This will be painted with single stage black to retain somewhat of period originality. I won’t be spraying lacquer...mostly because of the lifespan of that type of paint.

    I was hoping to get the parts car completely taken apart before I start this, but I need to get moving on it. I have a tentative goal of mid June for the BCA national meet in OKC.
     

    Attached Files:

  2. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Lots of little stuff to do on this one. Owner is going a different direction so the scope of the project will change a bit, but it will leave here pretty.
     

    Attached Files:

    Donuts & Peelouts likes this.
  3. Donuts & Peelouts

    Donuts & Peelouts Life's 2 Short. Live like it.

    What are his plans?
     
  4. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Hes has another car that is taking priority and I'm going to clean this one up as bast I can so it can be sold.
     
  5. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    I replaced the front driver door with one from the parts car I have here. The original one wasn't original to the car...and rotted at the bottom faster than the rest of the car. Same thing happened with the left fender. It was a replacement from a fender bender years ago, and was rusted out pretty good. I also replaced the rear left glass from the parts car. A "new" gas tank went in today, replacing the one pictured. Not only did it have multiple leaks on the bottom with sketchy patches, the sending unit has seen better days. Once the tank was in, I ran a new fuel line all the way from tank to pump. Yes, it is 100% rubber line. 57 and 58 Buicks all were this way.

    I hung most of the front inner sheet metal today as well. I plan on getting all of the sheet metal hung and gapped, then doing some light body work and shooting the whole car black. I also need to complete some mechanical assembly that did not get finished prior to me picking the car up from the owner. It'll be a pretty car, but basically a driver deal.
     

    Attached Files:

  6. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Front sheet metal lined up and car is in high build
     

    Attached Files:

  7. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    After a month of blocking, we are ready for some paint. Going to try making it all black this weekend sometime.
     

    Attached Files:

  8. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    :cool:
     

    Attached Files:

  9. Chi-Town67

    Chi-Town67 Gold Level Contributor

    Looks great Adam! Is that single stage?
     
  10. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Yessir. I wanted base/clear but he was trying to stay as close to authentic as possible.
     
  11. Brad Conley

    Brad Conley RIP Staff Member

    Ummmm, shiney.
     
  12. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

  13. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    All ready for assembly...

     
  14. My3Buicks

    My3Buicks Buick Guru

    Painting the wheels red to match the sweep? Looking great!
     
  15. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    I will have to defer to the owner on that one. They are a bit crusty and could use refinishing. Thanks!
     
  16. My3Buicks

    My3Buicks Buick Guru

    would be equally correct as the black and would really set it off
    [​IMG]
     
    Donuts & Peelouts and Smartin like this.
  17. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    The car was scheduled to go home for assembly this weekend coming up, but I noticed a miss when it was running. Further investigation revealed low compression in cylinder #3. Burned exhaust valve. Took the head to the machine shop and he found a crack in the head right at that valve seat. So, I am waiting on the machine shop to clean up another head I gave to him. Hoping for the end of this week for it to be back. New scheduled delivery time is the weekend of July 13.
     
  18. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    I hadn't realized that this thread wasn't updated since we found the burned valve.

    One of the heads from the parts car had to be used because there was a crack in the head from this car. Once I fixed that, I cut and buffed the paint out. The car was delivered back to the owner, and he completed the assembly process.

    It went on eBay a few weeks ago, but was a no-sale. He still has the car, and is currently looking for a buyer. It's a very solid car that only needs some minor help to get it to the next level.
     
  19. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

Share This Page