I have sold 4 of these before, it will save someone loads of money having a shop repair all the areas included in mine and mine fits exactly like it should. Removing from the spot welds and cutting the front firewall to cover those rusty pron areas. Pictures are from a previous sale, I have a 72 Monte which is exact same as the floor in the pics except not buckets or console, that I bought for all the exterior sheetmetal for my 71 Monte SS. Rust free floor pan along with the braces(71-72) 68-70 were a little different on the rear seat belt mounting braces and the center brace. Front frame mounts (torque boxes) are dual mount used on most convertibles and some hardtops including the full inner and outer rockers. $1150.00. 50.00 of that is for the pallet material. Trunk pan removed from the spot welds and cut in the rear about 3 inches up is 325.00 which has the 4 braces and the crossbrace in the front that meets the floor pan. I do ship using UShip it, giving you the discount rate. Does take time, about 4 weeks on my end with other orders I get. Joe 602-298-7090
I love how you dissect these. Seriously. Carefully drill everything out and separate it and not wrecking the pieces around it. The TIME you have involved in that is worth the price.
Impressive work. I am sure you have many hours in all that dissection. I know how long just correctly removing a quarter panel was.
