1/8 mile time slip

Discussion in 'High Tech for Old Iron' started by Buick#455, May 2, 2016.

  1. Buick#455

    Buick#455 Well-Known Member

    Nothing but spinning off the line...
    Buick 350 twin turbo set up
    10lbs of boost
    Th350, never got to shift out of 2nd gear by 1/8th.
    3:23 rear...... 295/65/15 Mickey Thompson drag radials.
    Old worn motor to boot. Can't wait for my custom Pistons to come in and finish my good block!
    Stroked to 370. Should really haul ass then
     

    Attached Files:

  2. tinker14bs

    tinker14bs Well-Known Member

    I'd be happy with that.
     
    Last edited: May 5, 2016
  3. CARHEX1

    CARHEX1 Founders Club Member

    dang my best with a 455 th400 and 4.10 on slicks was 8.096 @85mph. not bad just need to dial it in.

    Hector
     
  4. Buick#455

    Buick#455 Well-Known Member

    I'm sure if you gets yours to the track, you'll hit these numbers easy.
    Back to the track this Sunday, hoping to get into the 7's......
     
  5. moleary

    moleary GOD Bless America

    Fun stuff!!!:TU:
     
  6. sean Buick 76

    sean Buick 76 Buick Nut

    That is really good! I know my old car is running mid 11s in the quarter with tire spin, 342 gear, overdrive trans, full weight, and 8:1 engine, 350 cubes. That one made 460 hp at the tires at 10 psi so you are likely making about the same with a similar combo.
     

Share This Page