1967 Buick GS400

Discussion in 'Parts wanted' started by powertrip, Nov 9, 2018.

  1. powertrip

    powertrip Well-Known Member

    1) looking for these parts to fit my 3 1/2" thick GS radiator, also need the top radiator support from a GS400.

    2) 1967 GS400 fan blade (non clutch), with spacer, and bolts.

    3) Deluxe "Carriage" seat belts for buckets, and rear seat. Preferably black, at least driver quality.

    4) oil breather for 1967 GS400
     

    Attached Files:

    Last edited: Nov 14, 2018
  2. jmhock

    jmhock Well-Known Member

    Are you wanting the radiator top cover for an AC car (big radiator)? I have one if that is the piece you want.
     
  3. powertrip

    powertrip Well-Known Member

    Yes, that must be the one. Let me know how much$ Thanks!
     
  4. Couch

    Couch '67 GS400 Guy

    Got my P/S hoses thru Rock Auto several years ago, they appear to be as OEM as you can get?
     
  5. jmhock

    jmhock Well-Known Member

    $25 plus shipping
     
  6. GS Spoken Here

    GS Spoken Here Well-Known Member

    I can only find one 3 1/2" lower radiator tank holder, have 2 sets of 3". I am thinking these only came on 67's and heavy cooling big radiator. Any Idea where to get the rubber inserts. Steele rubber makes the 65/6 ones, kinda pricey and a little stiff and difficult to install in the core support and radiator top plate. Note the tits on the 65/6 are at 45 degree angles and 67 lower for 3 1/2" are at 45 degree angle, so maybe the 65/6 ones from Steele will fit. As I remember the 67 radiator cover has the tits straight up, and not at 45 degree, but not sure.
     
  7. powertrip

    powertrip Well-Known Member

    Thanks for the help so far everyone! I might have to take the one 3 1/2" tank holder, if I can't find a set.
     
  8. powertrip

    powertrip Well-Known Member

    jmhock, I sent you a pm.
     
  9. powertrip

    powertrip Well-Known Member

    Pm'd both of you multiple times. No reply?
     
  10. GS Spoken Here

    GS Spoken Here Well-Known Member

    powerstrip, I tried to fit the larger one I have on a big tank 67 radiator and it will not fit, not sure if they made 3 sizes or not. Re-checked the one I have and it measures about 31/4 inch. Will post pictures of the two sizes I have. Thanks Bill.
     
  11. jmhock

    jmhock Well-Known Member

    I sent you a reply stating I have them in Az in my garage. Should go after Thanksgiving and if still interested, get you pictures. Do have the big radiator in my 67 and know what your looking for.
     
  12. GS Spoken Here

    GS Spoken Here Well-Known Member

    I re-looked at the one I have and it appears some one took a small one and tried to make it fit a big tanks that is why it is slightly larger.
     
  13. powertrip

    powertrip Well-Known Member

    Thanks for looking!
     

Share This Page