1967 GS400 hardtop part out

Hey Joe, I might have one that I had powder coated and didn't end up using. I can't remember if I sold it at a swap meet or not. I'll have to dig around in my coldass garage and see if I still have it. I'll let you know a.s.a.p.

 

Ok thank you Stacey

 

I'm not sure if you can even ship the Hood to Florida, but if you could I'd be interested. My 67's a mess, but I'd like to fix it if part's weren't so hard to get would you be interested in cutting some sheet metal out around the back window and the trunk aria mines a mess back there? I'm in no hurry

Sent from my SM-T550 using Tapatalk

 

Photos of Big Block motor mount brackets are below.

View attachment 349321 View attachment 349322 View attachment 349323 View attachment 349324 View attachment 349326 View attachment 349327

 

Not sure if I missed the post, but are the wheel well moldings for all 4 corners still available?

Clyde

 

Wheel moldings are spoken for. Will let you know if the deal falls through.

 

Looking for motor mounts if you still have them and rubber is decent.

 

Yes, I still have them - I will post photos by Sunday.

 

Can you post pic of cross member and the brackets with rubber inserts?

 

Hey, I'm looking for the Brake pedal hanging Bracket. The piece that bolts to the firewall just above the steering column.

Thanks!

 

Hi Stacey,

How do the turn signal/parking light housings look? If they are still available/present. Thanks.

 

Hey guys - sorry, I have been out of the country for a while. I should be able to get out the shop this weekend and get photos/condition reports on the latest requests.

 

Photos of the transmission cross member is below. I didn't have time to clean it off but all the sludge it is covered in seems to have preserved it. A shot of the brake pedal bracket is below too. There is a little surface rust but it's in good shape. The front turn signal housing are trashed and not usable, so no pictures of those.

 

Prairiecanary - yes it is, sorry I didnt see your response for so long.... I'll take it, PM me and let me know how you want to get paid please.

 

Do you still have the frame mounts and the motor mounts? What about the radiator top plate? How about core support and inner fender for passenger side?

 

Frame mounts are sold.
I think I still have the radiator top plate. i will have to look.
Core support is available but is rusted through on either end.
Inner fenders were rusted through and I had to cut them to get the wheel well moldings off, so they are gone.

Let me know if you want photos of anything.

 

Possibly interested in the steering wheel. How does it look?

 

Steering wheel is a mess. It would be suitable for a core if you could find someone to recast it. I can photos if you want.

 

Photos of AC parts, Fuse Box, Armrest pads for Ziggy

 

More photos of AC parts, radiator support rods, pulleys for Ziggy.