1968 Buick LeSabre rear end

Discussion in 'Parts wanted' started by 53ragtop, Jan 16, 2020.

  1. 53ragtop

    53ragtop Well-Known Member

    Helping a friend.

    He needs a useable rear end, complete assembly or housing for a 1968 Buick LeSabre. Car is a 350 with automatic transmission.

    Preferably in north central Indiana or south western lower Michigan.


    ERICSBUICKS Well-Known Member

    I have a 68 Wildcat with a rear in it, although I don't know much about it. Located in Cinti., Oh.
  3. 53ragtop

    53ragtop Well-Known Member


    Thanks for responding. Is it still under the car or what’s the status? Was/is the car running? What would you want for it?

    The rear end in my friend’s car appears to have had a bearing freeze up and they continued to drive the car. Where the outer bearing fits into the axle housing is all worn and egg shaped.

    Do you have a contact number where he could reach you? I will try to make contact with him over the weekend. PM me with your contact info?


  4. flynbuick

    flynbuick Super Moderator Staff Member

    The Wildcat should be a 1966-70 Buick 9 3/8” rear while the LeSabre should be a 1968 -70 Buick only 8.2” rear.
  5. ynotbuick

    ynotbuick Platinum Level Contributor

    Have a 69 LeSabre parts car that was a 350 car with rear still under it, In ND and may be too far for him and wouldn't be available until spring when it thaws.
  6. 53ragtop

    53ragtop Well-Known Member

    Thank’s for the response, ERICSBUICKS, YNOTBUICK and the info FLYNBUICK. I was pursuing FB Marletplace this evening and found a rear end for FREE that a guy wanted out of the way. Called my friend (not internet savvy) and put him in touch with the guy. Will confirm tomorrow but for now believe the hunt is over!

    Thanks again!
    pbr400 likes this.
  7. 53ragtop

    53ragtop Well-Known Member

    Confirmed! Hunt is over! Thanks for the input!

Share This Page