Looking for the left and right upper door molding (the molding that went down the door and joined a quarter panel molding that lined up to the vinyl top molding). Also looking for the rear center molding the divides the vinyl top. Looking for something very nice needing polishing, no dents or deep scratches, I will step up for the right parts, Thanks, AL.
If you have a complete set I would be interested, also looking for the rear center that divides the vinyl top. Hard to find a good set that are not all dented up.
On my GS350 I have the molding under the door,front and rear doors.That's the one tha is about 1/2 imnch wide.I'll get Jason to take that out.as I will never take it out in one piece.I also have all the moldings,if the other gui's can't help you.Bruno.
I had a set for top but stashed it so good cant find it finally found my hood grills and seal plates after years had them in one of my guitar cases
The right is new left is a origanal for the door mouldings and under rear 1/4 windows I got a box of 100 that was the last box that my paint store could even find auveco products part # 10318 (8933059 and 449262 GM) 1968- on
Thanks Adam! Orders in, any idea on the retainer clips for the reveal moldings on the doors, looks like the ones on the quarter panels are metal.
Has anyone found the part number for the retainer clips that holds the door reveal molding on a 70-72 Skylarks?
Is this the door mouldings you need clips for ? And the box says 1968 and later cars GM and they worked fine on mine and match up to my old ones I took off car and yes the ones under window are push in clips and I think one on edge of door has a nut holding clip
I went through some boxes of extra parts and the white clips and clip with wire spring deal are for top of door mouldings and black one is for vynal tip trim behind window and accross the back window corners have nuts
https://www.ebay.com/itm/GM-Body-Si...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649 bought this set, don't fit anything!
