1970 GS Driver's Door Power Window Switch Connector

Discussion in 'Parts wanted' started by tminihan, Oct 1, 2018.

  1. tminihan

    tminihan 1970 GS455 Vert - Project

    I have the power window switch for the drivers door, and the wiring harness with the wires and clips on the end, I don't have the piece that the wires clip into - the piece that the switch attaches to. Thanks, Tom
     
  2. BrunoD

    BrunoD Looking for Fast Eddie

    I guess you want the bracket that attaches to the back of the switch and then snaps into the door panel,I have one of those.Bruno.
     
  3. tminihan

    tminihan 1970 GS455 Vert - Project

    Sounds right.
     
  4. tminihan

    tminihan 1970 GS455 Vert - Project

  5. tminihan

    tminihan 1970 GS455 Vert - Project

  6. Redmanf1

    Redmanf1 Gold Level Contributor

  7. Matt Knutson

    Matt Knutson Well-Known Member

    I think he needs the connector block - the block that holds the wire terminals and spaces them out and aligns the terminals into the switch.
     
  8. flynbuick

    flynbuick Super Moderator Staff Member

    I have a set of 70 Buick GS PW harnesses that I would sell for $50.00, but I would not want to break these up by removing the one piece.
     
  9. tminihan

    tminihan 1970 GS455 Vert - Project

    Hi Jim, I'm interested, will send PM. Thanks, Tom
     
  10. flynbuick

    flynbuick Super Moderator Staff Member

    I would like to send you some pictures.
     

Share This Page