1972 Skylark "GSX" Clone. With all the good performance stuff 650HP/622lbf for sale

Discussion in 'Cars for sale' started by Opa, Feb 23, 2020.

  1. Opa

    Opa Torque/a 8 piston figure

    1972 Buick "GSX" Clone.

    Open for offers and trades, looking to trade or buy a nice cruiser again.
    A-body car, or Buick Electra Park Avenue. 67 Chevrolet Impala 4 door in black paint color.
    I like alot of cars.

    I own this car since july 2004, and in 2009 replaced the drivetrain for a more powerfull version.
    Paint is oke has 2 paintchips on the passengers front fender and door, one paintchip on the front center of the fiberglass hood.
    Has two rust bubbles (for 15 years now) on lower part drivers outside door.

    For the rest the car is nice and solid and has no rust anywhere.
    On the passenger side there is a hole in the floor to the framerail, for the rollcage bar that was there and could and must be placed back if the mph or the ET of the car becomes any faster
    All Chrome is in a nice street car condition.
    Driver seat could use a new foam fill up.

    Car comes with its street wheels, or for some extra $ with its race wheels to.
    Car has now WELD draglite 7J wheels upfront, 8J Aluminium Streetrims in back.
    Race wheels are WELD draglite 4.5J front wheels and WELD draglite 10J 5.5BS rear wheels.

    This is the engine who started the custome made 470 diamond pistons combo's that are common now.

    Tri Shield Performance build:
    475CID Buick engine 10.7:1 pumpgas engine.
    650HP@6200rpm
    622lbf/849NM torque @ 4900rpm
    Aluminium TA Performance Stage 1 Track Eliminator heads, ported and flowed.
    TA Performance 1.6 Roller Rockers
    TA Performance SP2A (Stage 3) Aluminium intake.
    Diamond custom made Forged pistons.
    Eagle BBC H beam rods
    TA Performance 308S cam.
    Engine main girdle.
    All oil mods done.
    Moroso External belt driven oil pump.
    MSD Pro Billet distributor.
    MSD 6 AL ignition controller.
    PROFORM 950CFM 4150 race carburator.
    ATI SFI balancer
    JW SFI Flexplate
    Tilton Super Starter
    JW Full manual trans (TH400) with B&M Pro stick shifter.
    JW 9" 4000 stall convertor
    3inch exhaust with flowmaster Super 44 mufflers.
    Strenghted driveshaft + driveshaft loop.
    MOSER GM 12BOLT rearaxle with 33 spline axles from Moser, with STRANGE spool and 4.56:1 gears.
    H&R Parts N stuff # 1471 - Super Swaybar / Anti-Roll system.
    KONI SP1-A dragshocks front and rear.
    Aluminium radiator for engine, with dual electric fans
    Aluminium max sized Transcooler with electric fan (fan is not hooked up)
    Mallory 140 electric fuelpump, hooked up to the original OEM fueltank that has a fuelsump added.
    Mallory fuel pressure regulator.
    Optima Red Top battery in the trunk, with On/Off switch inside, and with removable lever for outside operation of this switch.


    Shipping:
    I got a quote for shipping the car to Houston Texas, that was 1125,-
    New York might be a little cheaper cause thats a shorter route.
     
    Last edited: Mar 4, 2020
    Brian Pryes likes this.
  2. Opa

    Opa Torque/a 8 piston figure

    pics
     

    Attached Files:

  3. Opa

    Opa Torque/a 8 piston figure

    more pics
     

    Attached Files:

  4. Opa

    Opa Torque/a 8 piston figure

  5. Opa

    Opa Torque/a 8 piston figure

  6. 1972 Stage 1

    1972 Stage 1 Well-Known Member

    Location and price?
     
  7. BuickGSrules

    BuickGSrules Gold Level Contributor

    Netherlands - Europe.
     
    Opa likes this.
  8. Opa

    Opa Torque/a 8 piston figure

    $17000 location The Netherlands
     
  9. Redmanf1

    Redmanf1 Gold Level Contributor

    Great sounding car...
     
    Opa likes this.
  10. Opa

    Opa Torque/a 8 piston figure

    Tnx
     
  11. 1972 Stage 1

    1972 Stage 1 Well-Known Member

    Probably going to have to pass due to location/shipping costs. Any idea how expensive it is to get the car in the US?

    Do you have any interior and engine bay pics?
     
  12. Opa

    Opa Torque/a 8 piston figure

    I will place some interior and engine bay pics today or at the latest tomorrow.

    like i said in my post earlier for US residents it is much cheaper to contact a shipper n the US that does overseas freight and have them give you a quote for the shipping of the car.
    Its strange but true.
    Pickup port is Rotterdam in The Netherlands, thats is close to my home.

    if you need more info let me know.
     
  13. Opa

    Opa Torque/a 8 piston figure

    Here some pics i had on my phone
     

    Attached Files:

  14. 1972 Stage 1

    1972 Stage 1 Well-Known Member

    Thanks Robert. I wish it was closer. I submitted a shipping quote and will let you know but I am not in line and do not want to hold up a sale.
     
  15. Opa

    Opa Torque/a 8 piston figure

    As far as i know your nr1 in line for the complete car.
     
  16. Opa

    Opa Torque/a 8 piston figure

    I need your adres or shipping port where it must be shipped to, so i can get a correct quote.
    Cause like the shipper told me, shipping a car to New York is half the price then to ship a car to LA, due to the distance.
     
  17. cjef

    cjef Well-Known Member

    Hi.
    is this car from US or original from Nederland ? and if this care are a BBC or a SBC in the title? are the car a slvige car? are the engine block fild?
    iam loocate in Norway.
    regards Jan
     
    Last edited: Feb 26, 2020
  18. Opa

    Opa Torque/a 8 piston figure

    Hello Jan,
    Car was imported by me from the US in 2004, later on when it was in The Netherlands I changed the drive train by having TriShield performance build me a engine and trans.
    Car does not have a BBC (Big Block Chevy) but Buick 475 CID engine, Block is 3/4 filled.
    Car is located in The Netherlands and has an EU Dutch title and registration.
     
    Gerald Sproles likes this.
  19. cjef

    cjef Well-Known Member

    hi
    hi agen.
    sorry i tape wrong abot BBC, what i meaning are, are the care a big block car in the title?

    regards jan
     
    Gerald Sproles likes this.
  20. PGSS

    PGSS Gold Level Contributor

    Unless I missed it, i'm curious if this is the same car as in "How to build Max Performance Buick engines" by Jefferson Bryant.
    Looks to have been upgraded alot too!
     
    Opa likes this.

Share This Page