I have an original right front fender off my '76 Skylark coupe that I'm willing to cut up for patch panels for your rusty fender or crash repair. Color is factory bronze. The top is creased along the upper contour line; but the inner part of the fender, all below the three fender ports to the bottom attachment point, and in front of the wheelwell from the back of the turn lens to the bottom of the fender are like new, with NO rust!!! This was off a dry eastern Washington State car from new up to 2009, and a dry central Oklahoma car to the present. The fender has the original paint on it and had never been repaired or touched. Pictures are available. I am willing to cut to fit your needs. A large piece (over 1/4 of the fender) will run $75.00. A smaller piece (1/4 of the fender or less) will run $50.00. Shipping is EXTRA! I will NOT ship the fender as-is, but only as cut panels. Shipping costs are going to depend on the size of the cut piece, and your location. I'm in central Oklahoma. PM me here for more details, thanks - Patrick
Bump = I have cut this fender into two useful patch panels - first, the lower seven inches of the front part of the fender; and the back half, complete with the three rectangular trim holes intact. Pics available.
