340

Discussion in 'Parts wanted' started by Fozwanger, Nov 26, 2018.

  1. Fozwanger

    Fozwanger Member

    hi,

    I’m after a 340 motor with/without ancillaries. I’m in the UK and have a shipping agent in NJ do it would need crafting up and shipping.

    W.H.Y?

    Jeff
     
  2. Fozwanger

    Fozwanger Member

  3. jmhock

    jmhock Well-Known Member

    I do have one that I built for my car and now selling as a roller. It is a 340 with 350 crank and rods. All ARP bolts, ported heads, intake and exhaust manifolds, stainless valves and hardened seats. All oil modifications (if you know what that includes), all high end stuff. If intetested let me know
     
  4. lrlforfun

    lrlforfun Well-Known Member

    OK JM: Where you at? How much? I'm a hack mechanic. I have a trio of 66 Le Sabres I'd like to get going. A convert with a 340 that's been sittin' a LONG time, a sedan....the same deal and a coupe that I'm havin' a guy build a 350 and it's a stalled project. I have 3 340 engines kicking around that are....who knows? Thanks, Mitch
     
  5. jmhock

    jmhock Well-Known Member

    Got over $3000 in machine work and parts so best I will di is $3500. Glad to send pictures if interested. All shipping, your cost.
     
  6. dual-quadism

    dual-quadism Black on Black

    Fozwanger, I sent you a PM
     
  7. jmhock

    jmhock Well-Known Member

    Here is a picture.
     

    Attached Files:

  8. PackerBacker

    PackerBacker Blake's Dad

    Fozwanger (Jeff) -
    We just removed a 340 this week from a 67 Wagon. Will need rebuilding but is complete, ST300 available as well. We've already dropped a 350 and OD trans in its place. I've got a HT crate we can drop it in and an LTL carrier that can get it to your East Coast broker. Let me know.
     
    Fozwanger likes this.
  9. philbquick

    philbquick Founders Club Member

    I have a carborated turbo V6. Same bell housing, same mounts, same fly wheel. Complete with turbo and carb $600.
     
  10. Fozwanger

    Fozwanger Member

    Hi, apologies for not replying but we’ve been having a baby over the weekend. What does the motor need? When you say rebuild do you just mean ring and ends and a gasket set or pistons, review, crank grind etc?
     
  11. Fozwanger

    Fozwanger Member

    I’d love to as it sounds great but too
    Much money for me atm ☹️
     
  12. Fozwanger

    Fozwanger Member

    Thank you but it’s not of any use to me as I have a custom injection system that I made for a rover v8 but I want more cubes
     
  13. 12lives

    12lives Engage! - Jean-Luc Picard

    congratulations on the baby!
     
  14. Fozwanger

    Fozwanger Member

    Thank you, it’s baby number 7!!!!!!!
     
  15. philbquick

    philbquick Founders Club Member

    Way cool! Who made that system? Is it port?
     
  16. Fozwanger

    Fozwanger Member

    No, multipoint, I made/designed it with a chap who builds injection systems for V8 super car Australian racing series. I’ll try and put some pictures up for you
     
  17. Fozwanger

    Fozwanger Member

    Here it is. We took an Edelbrock manifold and fitted 38 lb injectors in it, all individually controlled so no batch firing or wasted spark, custom made fuel rails and plenum, all sensors hidden along with a 200 shot of nitrous, less flash when the injectors fire, custom distributor as I didn’t want coil on plug or coil packs and trigger wheel, so we gutted the dizzy and added dual gall effect transducers to catch rise and fall of the pulse to fire the ingnition timing, custom made rotor arm to cope with the adv/ret timing when in boost, all run through a motec ecu.
     

    Attached Files:

    Last edited: Dec 13, 2018 at 4:26 AM
    pbr400 likes this.
  18. philbquick

    philbquick Founders Club Member

    That's very extreme! I know Derick can get a 300ci in a 215 block and 340 in a 300 block.
     

Share This Page