350 Buick in a Regal

Discussion in 'V-8 Buick Powered Regals' started by gymracer01, Mar 12, 2010.

  1. gymracer01

    gymracer01 Well-Known Member

    What are you people using for frame and engine mounts for a 350 Buick engine in say a 83 Regal. I've got a bunch of different mounts from V6s, 350s, 455s, early and late and have not come up with right combo.
    Thanks
    Jim N.
     
  2. sean Buick 76

    sean Buick 76 Buick Nut

    As far as I know you need the Buick V6 frame pads and V6 mounts for a Regal.
     
  3. skylark

    skylark Well-Known Member

    Bingo
     
  4. Running

    Running Midwest Buick Mafia

    Yup !
     
  5. gymracer01

    gymracer01 Well-Known Member

    That's good to hear, but I have tried them and know my problem. When I put a 455 in the car I slide the engine back as far as possible and now the trans is back too far for the V6 mounts to bolt right in. It's a race car and I was not concerned at the time with placement. The 350 headers do work nice in that location. Will see what it takes to fix this mess. Don't want to have to make another driveshaft and move the crossmember if possible. Thanks for the advice, I had about came to that conclusion.
    Jim N.
     

Share This Page