For whatever reason, I'm having a hard time finding intake manifold and head bolts for my sbb. Anyone know where i can find them. I looked on Summit, Jegs, and OPG and can't seem to find any. Thought I had found them on OPG but when delivered were obvious wrong ones. If you know of an exact part# that would be helpful too. Jeff
I have Grade 8 Flange Bolts in stock that are really close to the originals. About the only difference is mine are not "cupped" like the originals. They're phosphate coated (Black) and a Flange Bolt like the originals so very close. They can be seen on my website - engine section > http://www.diecastmusclecars.com/dcm455bolts.htm I have them in 3/8" and 7/16". Not sure what the 350 takes? (I specialize more in the 455's but should have ones that will work on the 350 also) Let me know if I can help. Todd
They only come in one size,the bigger ones are for the r for the 400 engine.We just have to know if you need all of the same length ,or you might need a few of the longer ones.I think the earlier modes had all of the same length.Bruno.
I sold some Intake Bolts to a guy that had a 400 and if I remember correctly the 400 uses a 3/8" Intake Bolt. (Found this out after sending him 7/16") Also, in regards to the 455 (and maybe other sizes) the 1972 and later intakes do require two different length bolts as Bruno mentioned. (Because of the different intake designs that incorporated emissions stuff) The 350's may be similar?? So yeah, need to know diameter and length! (Just to be sure)