455 distributor with STINGER S4 SETUP!

Discussion in 'Parts for sale' started by wheelz, Mar 17, 2016.

  1. wheelz

    wheelz 'B' is for Buick.

    STINGER S4 ~ Perhaps one of the BEST OLD SCHOOL electronic Ignitions systems on the market!!! ..and I approve this message.

    A While back, we had this distributor built for my Buddies 71 Stage 1... Local Buick Guru Ken Darby used a 67 340 base distributor 1111159 7E3, I beleive, because it had a wider range advance system for REcurve kit... :Dou: well, thats what I remember so I'm going with it! :bla:
    In the 22+ years Bob owned the car, he took many many road trips to BG and quite a few successful 1320's with this setup...it performed FLAWLESSLY! I would imagine it still has a lot of life in it!
    When the car was restored, the new Mike Philips motor arrived pre-dialed in and setup with a new distributor, so I held onto this setup for someday.
    That someday is now.
    The 'hand etched numbers' into the back of the Stinger pod: 4 D 2152 2 90 .

    You will get everything as shown: 67 Distributor with 455 gear and a professionally rebuilt curve kit, Stinger High Perfomrance 55,000 volt coil #3102, in line resistor, COPPER distributor and rotor, connectors, harness and of course control module.

    $148.57 shipped to any lower 48!
    PayPal preferred ONLY if sent as FAMILY AND FRIENDS!

    If you are serious, Get in line here first then PM me your intent... If you are not serious, please dont.

    Wheelz, Tampa Bay

    Attached Files:


    69BUICKSTAGE1 Well-Known Member

    Interested sending PM.
  3. wheelz

    wheelz 'B' is for Buick.

    Still available!!!

    69BUICKSTAGE1 Well-Known Member

    Still interested
  5. 72STAGE1

    72STAGE1 Runnin' with the Devil

    In Line Sir.

    Not that it will influence my descision on this but, Interested to know, what's the opinion of this being perfectly compatible with using a Petronix III module conversion ?
  6. wheelz

    wheelz 'B' is for Buick.

    This STINGER unit is a complete ELECTRONIC IGNITION, module, distributor, harness etc.. I have never tried, nor heard of, anyone using anything aftermarket with the Stinger system other than original components.
    Dont quite understand the benefits of doing what you are suggesting. :Do No:

    Stinger is a VERY SUCCESSFUL and POPULAR ignition system...

    Wheelz, Tampa Bay

    BUICKBEN Well-Known Member

    Interested will send you a PM
  8. wheelz

    wheelz 'B' is for Buick.

    At this point, I have a fairly reasonable offer on the table that I have not accepted yet... if one of you steps up at closer to the asking price, I would consider it sold!

    Ben, PM with shipping details sent!

    Wheelz, Tampa Bay
  9. skierkaj

    skierkaj Day 2 Street Screamer

    So when the original electronic portion fails you can wire in a replacement? :Do No: I would guess this is the reason . . .

    69BUICKSTAGE1 Well-Known Member

    Ok I accept your offer. Thanks sent PM
  11. wheelz

    wheelz 'B' is for Buick.

    SALE PENDING to 69BuickStage1...

    BUICKBEN Well-Known Member

    Sent a reply to your shipping details. Guess I was just a little late on this one. :Dou:
  13. wheelz

    wheelz 'B' is for Buick.

    Ben, you werent late. . .the buyer was the initial 'reasonable offer on the table' that we just negotiated and finalized.

    Wheelz, Tampa Bay
  14. HotRodRivi

    HotRodRivi Tomahawks sighted overseas

    Can you put it in a mallory dist
  15. Brett Slater

    Brett Slater Super Moderator Staff Member

Share This Page