Selling BUICK 455 engine parts for a good budget builder. Selling as a package deal only: $400.00 dollars plus shipping if needed. Located Near Seattle, Washington. 1976 455 block, hot tanked, magged and measured to specs. It could use align hone. Cyllinder bores are very nice (no ridge) at +.040" over, only need quick clean up hone for your piston matching. Includes main caps and bolts. 1976 455 crank shaft, turned previously, just polished, one small imperfection on a journal but nothing to sweat (it was not worth turning it out further). Includes bolt, washer and oil slinger. 1976 455 con rods, cleaned and magged good cores, ready for rod prep / resizing for the build. Complete set with wrist pins. 1976 455 timing cover and oil pump housing, good core part, minimal insignificant wear. Includes NEW long shaft water pump. 1976 455 harmonic balancer, good part. 1973 455 Oil Pan. Clean & straight, in good shape with minor dings. Inlcudes windage tray. Motor Mounts, barely used, clean painted black 1976 455 engine Bolts, tank cleaned, inlcudes the following sets: (Main & Rod bolts already included with block) Timing cover / water pump / oil pump Head & Intake Crank Pulley and Flex Plate bolts Oil Pan Oil pick up & windage tray Starter Heat Shield bolts Rocker assembly Correct Valve cover hold downs with plug wire retainers Motor Mount Exhaust manifold Misc nick nacks also available, just ask and we can work it out.
The package will include FEL PRO head gasket set and a timing cover / oil pan gasket set. Going to FEE BAY Saturday.