455 Parts for High Performance

Discussion in 'Parts for sale' started by Christopher Spouse Drew, Aug 31, 2019.

  1. Christopher Spouse Drew

    Christopher Spouse Drew Well-Known Member

    I just bought a bunch of stuff over the week and I'm keeping what I need and selling the rest so here we go.


    455 TA Performance Main Girdle and Oil Pan both these parts need some cleaning up, there is rust inside the oil pan, if I clean it up the price goes up. $550
    upload_2019-8-31_19-45-30.jpeg
    upload_2019-8-31_19-45-59.jpeg

    Arias Blower 4.320 Pistons(9) with rings. These are supposedly mopar pistons that can be used in our engines with modification. $500
    upload_2019-8-31_19-49-24.jpeg

    upload_2019-8-31_19-50-0.jpeg
    upload_2019-8-31_19-50-40.jpeg

    Now we have supposedly mopar connecting rods, I believe to be after market or machines(8). $200
    upload_2019-8-31_19-53-31.jpeg

    1968 big port 430 stage 1 heads with port and polish I'm looking to get around 1k for these but after I look them over better and possibly get some flow numbers I'll put a permanent price.
    upload_2019-8-31_19-56-38.jpeg
     

    Attached Files:

    Last edited: Sep 19, 2019
    Julian likes this.
  2. Christopher Spouse Drew

    Christopher Spouse Drew Well-Known Member

  3. Christopher Spouse Drew

    Christopher Spouse Drew Well-Known Member

  4. GS Kubisch

    GS Kubisch THE "CUT-UP" BUICK

    Interested in the crank. Let me know what you want for it.
     
  5. johnriv67

    johnriv67 Well-Known Member

    In line on heads, pending more info
     
  6. Christopher Spouse Drew

    Christopher Spouse Drew Well-Known Member

    I have one person in front of you but youre up next if they pass when i decide on price.
     
  7. Todd Borland

    Todd Borland Buicktodd

    Just as well jump in line on the crank
     
  8. Christopher Spouse Drew

    Christopher Spouse Drew Well-Known Member

    Does this crank look familiar to anyone?
     
  9. dan zepnick

    dan zepnick Well-Known Member

    Inline for the crank if it gets this far.
     
  10. GS Kubisch

    GS Kubisch THE "CUT-UP" BUICK

    TA has mainly sold 4.400 stroke cranks. That said, it could well be a Crower bought through TA. If not a Moldex.

    This is assuming it is a 3.250 main and 2.200 rod.

    Is the stroke stamped on it, were you told 4.400, or did you measure?
     
  11. Christopher Spouse Drew

    Christopher Spouse Drew Well-Known Member

    It's stamped with 4.4 on the crank
     
  12. Stage 2 iron

    Stage 2 iron 475 IRON HEAD STAGE 2

    Can you post a picture of the 4.4 stamp on the crank maybe JW can help identify what manufacturer the crank Is.
     
  13. sean Buick 76

    sean Buick 76 Buick Nut Staff Member

    As per the board rules you need to list a price for the crank.
     
  14. sean Buick 76

    sean Buick 76 Buick Nut Staff Member

    Thanks for adding a price for the crank, all good.
     
  15. Tom Haeffner

    Tom Haeffner Well-Known Member

    I will jump in line if the crank gets to me.Thanks. Tommy.
     
  16. Christopher Spouse Drew

    Christopher Spouse Drew Well-Known Member

    This a Moldex Billet Crankshaft, I contacted Moldex and they confirmed it. These cranks are almost 4K brand new with a waiting period of months up to a year.

    The list price is 3k w/ shipping or pick up 2.7k
     
    Last edited: Sep 4, 2019
  17. redsixty9

    redsixty9 Platinum Level Contributor

    Yikes!!! It's still a used crank that has some obvious damage and not 100% sure of what you actually have. I'm not saying it's junk but still a gamble to the buyer. GLWTS
     
  18. Christopher Spouse Drew

    Christopher Spouse Drew Well-Known Member

    I understand its a big price tag, but how many are out there for sale?

    I'm willing to do trades and cash because I need a lot for my car.

    I need the following:
    TA Timing Cover
    Rear GS Spoiler
    Power Steering Pump Brackets and Pulley
    Top A/C Bracket that attaches to the manifold'
    Full Passenger Side Quarter Panel(maybe even both quarter panels)
    Stock Oil Pan
    GS Hood
     
  19. GS Kubisch

    GS Kubisch THE "CUT-UP" BUICK

    Chris, Got your pm.

    I'll respond here.....

    I think "3k" is too much for what you have unless you really knew the details.

    By the time a buyer had it mag'd , polished or ground and rebalanced you could exceed the cost of a new unit.

    Good luck, if someone down the line doesn't want it for $3,000 let me know.
     
  20. Christopher Spouse Drew

    Christopher Spouse Drew Well-Known Member

    Alright, I like all you guys on here and I dont want to feel like im ripping someone off. Ill drop the price to 2.5k, anyone wants it, can message me. and remember trades are welcome with the wanted list above.
     

Share This Page