64 - 67 Bellhousing #9774035

Aluminum bellhousing, for 64 - 67 cars. For smaller diameter flywheel. "Standard" BOP bellhousing to engine pattern. Excellent condition, cleaned, and four new heli coils installed. Part # 9774035. $119 plus ship.

 

Will it fit a regular size flywheel

 

What engine are you wishing to fit this to?? Standard BOPC pattern, not nail head.

 

TTT, this is still available. Four new helicoils. Cleaned.

 

will it fill the 68 Buick 400?

 

FYI,. you can fit this on a big block Buick with a 12" clutch, I know because I did it.

 

Thanks, was under impression it is for smaller diameter flywheel. Like the big and small Chevy bellhousings. Yes it is still available.
Dave S. dona Ana NM 88032

 

ttt.

 

TTT.

 

GSS wont accept any PM's here so I hope he sees this.. Its a rejected copy and paste from a PM attempt. Need some input on the bench if possible. I may not look down here for a while. ws

Hey pal... we've chatted before and I need some help. Installing the 455/super T-10 into the 1964 Special, wheres the best frame /motor mount/ crossmember locations to use? The front clip is off the car right now, so its all pretty accessible. Using the same OEM 1964 Bell housing you used 9774035. Mine had a 3 on the tree, so I am using the OEM Z bar mount stuff as a datum point. Please feel free to PM me here, or email me to use pictures. Thanks a million! Bill in TR, Wi. at yachtsman36@charter.net

 

TTT. Bellhousing still available.

 

ttt.

 

TTT.

 

ttt.

 

TTT

 

ttt.

 

TTT.

 

ttt.

 

TTT.

 

ttt.