64-72 Original Hardware,Clips and Hard 2 Find Misc Small stuff

Discussion in 'Parts for sale' started by AzChevs, Oct 17, 2017.

  1. AzChevs

    AzChevs Well-Known Member

    This is years of taken apart mostly 68-72 GM A body cars and saving all the smaller stuff that was still good. These are all GM used parts from Arizona cars, correct for a nice restoration. Prices range but example are door panel clips for .50 cents ea,smaller speed nuts .40 cents ea,medium .60 ea. and large .80 ea headliner center plastic clips 2.50 ea, dimmer switch grommet 4.00, door hinge bolts $1.00 each. Suspension bolts include the torque nuts, treads are double checked, front upper A Arms with nice splines $3.00 ea, Lowers are $5.00 each same price for the rears with sets discounted to $32.00. Trunk extension drain plugs $12.00 for rubber ones pr or metal for $15.00 pr also have the floor drain plugs $5.00 each, set of 7 $30.00. Windshield lower support $15.00 pair including screws. I also have all the fender mounting hardware from the smaller 1/2 inch head bolts $1.25 ea, larger 9/16 top rear fender bolts are $2.50 ea, lowers are $5.00 each. Frame mounting bolts are also $5.00 each and washers $2.00. Much more so let me know what you see. These are correct,original hardware and checked before shipping. Shipping flat rate boxes, small $7.15, medium $13.60 or large $18.85. If your in Canada, remember besides the much higher prices on these, they also have weight limits. I take Paypal as sales, Joe 602-298-7090
     

    Attached Files:

  2. TrunkMonkey

    TrunkMonkey Well-Known Member

    I will take any "bathtub" clips for the 1964 side spears.

    Let me know how many, total cost with shipping to 32547, and I'll PP you.

    Thanks. :)

    upload_2017-10-17_15-26-47.png
     
  3. AzChevs

    AzChevs Well-Known Member

    I'll round up what I have and give you a measurement to make sure it will work for you.
     
  4. TrunkMonkey

    TrunkMonkey Well-Known Member

  5. BuickV8Mike

    BuickV8Mike SD Buick Fan

    Any front bumper stainless large covered panheads? The ones that would hold on the bumper on a 1969 GS.

    Cheers,
    Mike
     
  6. Redmanf1

    Redmanf1 Gold Level Contributor

    I am interested in 2 pair convertible windshield stops. Interested in two of the torque nuts (square nuts).
     
  7. DasRottweiler

    DasRottweiler -BuickAddict-

    I've been searching for the clips to mount 70 Skylark base model rocker panel spears. I have the metal hardware for either end, but need the plastic ? clips that go in between and pop into holes in rocker.
    Also looking for any hardware to mount peak moldings on the same car. Specifically the plastic pieces that pop onto pegs on door. They are abit smaller than the door protection molding pieces.
    And lastly , h- clips for cowl screen.
    Any help would be appreciated, Jim/Rott
     
  8. AzChevs

    AzChevs Well-Known Member

    Here is a measurement of it, a little passed 2 inches in height, I have another 6 along with these. Price is 1.00 each, shipping flat rate small box is $7.15. Joe
     

    Attached Files:

  9. AzChevs

    AzChevs Well-Known Member

    Mike, I don't have any pieces for the front of a 69 anymore except for the grill mounting brackets. Cheers,Joe
     
  10. AzChevs

    AzChevs Well-Known Member

    Here are some pics of the stops, not sure if that was the same as what I was calling the windshield supports. I have torque nuts, was it for the control arms or upper A arms?
     

    Attached Files:

  11. AzChevs

    AzChevs Well-Known Member

    Sorry, no luck on those plastic clips, I just had the metal end ones too. Here are the H clips that are in nice shape, they are $1.75 each, shipping flat rate envelope for $6.80.
     

    Attached Files:

  12. TrunkMonkey

    TrunkMonkey Well-Known Member

    So, a total of eight clips?
    If that is correct, I'll PP you $16.

    Thanks. :)
     
  13. AzChevs

    AzChevs Well-Known Member

    Yes, perfect, my email for PP is vegaazbowties@aol.com Thanks,Joe Vega
     
  14. TrunkMonkey

    TrunkMonkey Well-Known Member

    Done.

    Thanks again! :cool:
     
  15. AzChevs

    AzChevs Well-Known Member

    Have much more smaller parts including what you see in the pics. Have the hard to find original rear F-41 Reinforcement bar washers for the lower trailing arm mounts. If your building a 100 point GS, these are a must and can be seen if a Judge is looking on the underside of the car, price is only 12.00 for the pair. Can text a pic, camera is down. Bench seat side trim, passenger side is lightly scratched $25.00 pair. Headliner Tacking strip original screws for $20.00 set of 30, trunk locks 15.00 ea, bolt are 1.00 each extra, drain plugs are 2.00 each min 4 for a sale, 7 per car and rear hood catch bolts $20.00 pair.
     

    Attached Files:

  16. Rich Johns

    Rich Johns Platinum Level Contributor

    Hi Joe
    Interested in the cowl located rear hood adjusters.
     
  17. AzChevs

    AzChevs Well-Known Member

    Hey Richard, Shipping small flat rate box or Priority envelope to Canada or US? US is $ 6.80 or 7.20 and Canada is $24.95 or $25.95.
     
  18. Redmanf1

    Redmanf1 Gold Level Contributor

    E - brake cables?

    Thanks
    Nelson
     
  19. AzChevs

    AzChevs Well-Known Member

    $45.00 plus shipping, medium flat rate box for $13.65
     
  20. AzChevs

    AzChevs Well-Known Member

    Just checking to see if your interested in those new cables.
     

Share This Page