650 dp 4165 divorce choke to cable

Discussion in 'Holley' started by 1987Regal, Mar 22, 2018.

  1. 1987Regal

    1987Regal Well-Known Member

    I bought a Holley 4165 to replace the 750 square bore 3310 upon getting it I didn't realize I had to have a divorced choke setup to make the choke work. my divorced choke setup is blocked off so it cannot function therefore I made a setup for cable operated choke here are some pictures. By the way the pick use was just in place of the cable to figure out where to drill the hole for the choke cable. Josh

    Attached Files:


    DEADMANSCURVE my first word : truck

    looks ok . just check to make sure you have enough travel and will probably have to adjust choke idle speed screw underneath there .

Share This Page