I have a 67 2 door post car - California GS. The window frames that are mounted to the door have flattened out and don't seal properly at the rear upper corners. With the door closed they are sticking out from the body / door opening and not allowing full contact with the seal. Does anyone have any ideas how to fix this? Thanks
You need to bend the frame back to where it belongs. I've seen auto body guys do this by lowering the glass and grabbing the frame at the corner and gently pull while holding the door open with your hip/leg from the inner part. I've done this to a couple of post cars myself with good results. Just be gentle and a little at a time.
