69 GS 400 parts

Discussion in 'Parts for sale' started by cole, Oct 15, 2018.

  1. cole

    cole Silver Level contributor

    This is one of my Oshawa built GS 400 parts cars that is coming to an end. If there is anything you see that I haven't listed just ask and I can get more pictures and pricing
    console setup, including, shifter, console body (missing console lid), completer wiring harness, your choice of tilt or non tilt column, floor brackets and attaching hardware, console style gage face $650 with standard column $800 with tilt. I will have to get pictures if interested
    rear defogger setup including the wiring, duct, grill, and switch plate $85
    sail panel light housings and wiring $25
    head liner bows and clips $25
    door jamb vents $10
    gs door panel emblems $18
    arm rest backing plates $25
    glove box door $10
    nice sun visor swivels $18
    LH kick panel $28
    quarter window seal chrome $20 pair
    soft ray glass not perfect driver quality some scratches $20 per pane
    wiper arms and transmission $25
    big block engine mounts $80
    windshield trim, rear window trim $45 set
    door and quarter window parts or pieces $5 up let me know what you need
    heater controls with good cables tabs $40
    toe board $5
    windshield heater duct $10
    mirror map light, mirror face is bad $12
    wiring harnesses-trunk harness $15, tail light harness one rh plug cut off (comes with a replacement) and exposed wire on lh $10, engine side wiring harness in good shape $20
    roof rail channel trim $15
    dash pad (I have a few colors) $35
    I can cut patch panel areas as well
     

    Attached Files:

  2. mild2wild

    mild2wild Well-Known Member

    What kind of condition are the sail panel courtesy light housings and lenses?
     
  3. 68Skylarker

    68Skylarker Well-Known Member

    Cole inline for shifter if separate
     
  4. BuickV8Mike

    BuickV8Mike SD Buick Fan

    Interested in the door panels and seat covers. What condition is the passenger door? Thanks Cole! Mike
     
  5. Marcdbuilder

    Marcdbuilder Well-Known Member

    Interested in armrest backing plates if 16 inch armrests.
    Thanks. Marc.
     
  6. 69GS455

    69GS455 69 GS 400

    Hi Cole,
    What kind of shape is the rear window and roof rail trim in? Also which pieces of glass do you have?

    Thank you,
    John
     
  7. Marcdbuilder

    Marcdbuilder Well-Known Member

    Center console and shifter as well. If willing to seperate.
    Marc.
     
  8. Buicksky

    Buicksky Silver Level contributor

    Cole,
    Hello! Let me know shipping to 44321 . rear defogger setup including the wiring, duct, grill, and switch plate $85 Is the switch available with the switch plate . Is anything missing?
     
  9. babyblue 69

    babyblue 69 Well-Known Member

    I need a driver fender if you have one thats in good shape?
     
  10. cole

    cole Silver Level contributor

    Hi Tony
    Here is the defog setup. Fan runs nice and quiet, everything including hardware is there. I just have to check for a switch and get a shipping quote
     

    Attached Files:

  11. cole

    cole Silver Level contributor

    Every fender I have needs either rust repair, dent repair or both
     
  12. cole

    cole Silver Level contributor

    Hi John
    Roof rail and rear window trim are nice no dents or scratches I can get you some pictures of each. All of the soft ray door and quarter window glass have scratches and would be OK to use for a driver quality car or if yours are broken or have more scares than these guys
     
  13. cole

    cole Silver Level contributor

     
  14. cole

    cole Silver Level contributor

    Hi Marc
    I thought I grabbed some pictures of the backing plates but they aren't in my file. I will have try again as well as the console and shifter
    Here are the sail panel housings
     

    Attached Files:

  15. cole

    cole Silver Level contributor

    Hi Mike
    The first picture is the passenger door panel in the red 69 GS 400, I don't think it is that great. The 2nd picture is of a 2nd one that is in my other 69 GS 400 parts car, it is not bad for a driver quality interior. The rear seat upholstery on both cars I think could be used, I thought I grabbed pictures of the seat but they are not in my file so I will have to try again
     

    Attached Files:

  16. Marcdbuilder

    Marcdbuilder Well-Known Member

    Thank you Cole.
     
  17. 69GS455

    69GS455 69 GS 400

    Cole,
    Pics would be great. Send them to my email. gs400jt@gmail.com.
    Thank you.
     
  18. BuickV8Mike

    BuickV8Mike SD Buick Fan

    I'm interested. Sending PM. Cheers, Mike
     
  19. Buicksky

    Buicksky Silver Level contributor

    Cole, Sounds good I will be waiting on your response. since you will be boxing up items Can you also pull a gas tank sending unit wire for a 69 ? (I believe its a single tan wire with a connector on both ends)
     
  20. bernhard

    bernhard Member

    Hi Cole
    Do you have front aluminum drums for sale off the 69 GS
    Thanks
    Bernhard
     

Share This Page