70 GS 455 Coupe rear interior molding

Discussion in 'Interior City' started by BDK, May 1, 2017.

  1. BDK

    BDK Well-Known Member

    I have a question about a piece of interior molding I "think" should be in my GS455. The piece I believe it should have is at the bottom of the sail panels and above the package tray. Is there a piece of molding that should fit in this area? If so, is there an aftermarket piece available and if not does anyone have 2 that I could buy?....:)

    BDK
     
    BDK, May 1, 2017
    #1
  2. steve covington

    steve covington Well-Known Member

    Oh, I think you mean the corner pieces that are frequently called 'eggshells; they are SO fragile, and yes, not the same as other cars of the A-body line...
     
    steve covington, May 9, 2017
    #2
  3. BDK

    BDK Well-Known Member

    Thanks Steve. Already replaced the corner pieces....and yes they are VERY fragile
     
    BDK, May 19, 2017
    #3
  4. wunquik86'

    wunquik86' Well-Known Member

    Does any company make them at present. I purchased some from a friend in Texas but they were in pieces by the time they arrived. Gonna try and glue them back together, not sure about putting them in with one screw even.
     
    wunquik86', Jun 2, 2017
    #4

Share This Page