Discussion in 'Parts wanted' started by scubasteve455, Sep 12, 2018.
I’m in need of a hose and clamps for my air pump.
Anyone have a sample picture. I have a few.
John could you post some pic.
John would you have the skinny long brace that goes in the front of pump. I have the rear bracket
How much for the hose? Can’t find any pictures.
Here are the two relevant pages from the 1972 Chassis Manual. I removed all of this from the Electra and they are in a box... somewhere. If you are short a part let me know.
Bob I need Valve assembly and hose that goes to the intake manifold . And the clamps that go on hose. And the brace that goes on the front of pump. And bolts to the aluminum block bracket
And all bolts for the front bracket. I have the AIR pump and rear aluminum bracket
Thanks for the pic
OK - I'll see what I can dig out for you.
i have all of this on a 72 455 that i wont be reusing.
the entire thing.
located in western ny state.
Hey Steve - Here's what I dug out. Everything but the bolts, most of which are still holding the power steering pump on
If this works for you shoot me a PM with an address.
I have no idea of value so whatever works for you plus shipping is good for me.
Very nice Bob! PM me your address and what you want $$$$. Thank you life saver.
My car will be Quicker with this on
It really will with the added "boost", A.I.R. pump will act like a miniature blower.
Now the only piece you'll be missing is the tubular brace that runs from the back of the A.I.R. pump to the third hole on that stand pipe base.
Stratocaster can you send me pic.
Not sure what you mean. What I’m missing
Ohh.. I did see a tubular brace in the box of bits but didn't connect it with the AIR pump. I'll throw that in too. Plus the valve to pump bolts in case you are short those as well.
pics of 1972 air pump w tube still on motor,may help.
i can also pull the entire system off and take pics of just that w the right bolts if needed.
* this motor/455/came out of a 72 buick centurion *