75-79 Skylark/75 Apollo parts grab bag

Discussion in 'Parts for sale' started by newmexguy, Dec 15, 2017.

  1. newmexguy

    newmexguy Well-Known Member

    Digging through a decade old stash and re-listing these (before they wind up going to desert valley)
    A few of these parts may be same as the more common Chevy Nova, but most are Buick specific
    Headlight extensions, 77 Skylark, white, potmetal, should fit all years $75 both
    Latch assemblies, (2), should fit all five years, $40 (w hood release cable) and $30 (w/o cable)
    (2) sets of grille brackets, $25 per pair
    Grille emblem, from a 77, guessing it may be same all years $15
    One horizontal grille trim, $10
    Faux fender portholes, no pits, VG (from a 77) $35
    Rear interior ashtrays, $5 ea.
    Front bench hinge covers, okay shape $5 both
    Coat hooks, one tan, one blue $5 both
    B pillar interior wood grain inserts (2) $15 both
    Upper front tan seat belt retractor cover, tan okay shape $5

    Will sell entire lot for say - $125.
     

    Attached Files:

  2. newmexguy

    newmexguy Well-Known Member

  3. newmexguy

    newmexguy Well-Known Member

  4. newmexguy

    newmexguy Well-Known Member

  5. newmexguy

    newmexguy Well-Known Member

  6. newmexguy

    newmexguy Well-Known Member

    TTT. All parts with exception of headlight buckets still available. Buckets did go to DVAP.
     
  7. newmexguy

    newmexguy Well-Known Member

  8. newmexguy

    newmexguy Well-Known Member

  9. yachtsmanbill

    yachtsmanbill Need directions to BANNED camp

    NMG... If ya have some time can you take some measurements on the 75 Apollo stuff? I need two fender ventiports and two front fender spears for my 1964 Special. A perfect match isnt gonna happen, I know, but I can always make stuff work. The ports are good if they cover (most of) the existing holes, and the spears are 55" long and 3/4" (.740") wide in aluminum. The pic shows what I need but for BOTH sides with the fasteners if possible!. Thanks, Bill

    z71.jpg
     
  10. newmexguy

    newmexguy Well-Known Member

    Sure might not be able to until next weekend. Work out of town in the copper mine area of Safford during the week. Thx for reaching out. Dave S.
     
  11. yachtsmanbill

    yachtsmanbill Need directions to BANNED camp

    200 miles is a long commute... no rush, but when ya get home... BAMMM :eek: Give me a shout when ya can OK.... Bill
     
  12. newmexguy

    newmexguy Well-Known Member

    The 75 - 79 venti ports are on the top. They are integral.
    The 73 - 74 venti ports are on the bottom. They are separate from each other.
    Roughly 2 3/16" spacing between studs on the 73 - 74 ports.
     

    Attached Files:

  13. yachtsmanbill

    yachtsmanbill Need directions to BANNED camp

    In line I think for the 73-74 6 individual ports. My studs are 4-1/4" apart... no biggy and are 6-3/8" long each. Are these even kinda close and from the pics, it looks like they sit flush. Correct? Shoot me yer best on these plus the truck. ws
     
    Last edited: Feb 10, 2019
  14. newmexguy

    newmexguy Well-Known Member

  15. newmexguy

    newmexguy Well-Known Member

  16. newmexguy

    newmexguy Well-Known Member

  17. newmexguy

    newmexguy Well-Known Member

  18. newmexguy

    newmexguy Well-Known Member

  19. newmexguy

    newmexguy Well-Known Member

  20. newmexguy

    newmexguy Well-Known Member

Share This Page