830 Holley annular-discharge booster carb

Discussion in 'Parts for sale' started by GS Spoken Here, Dec 5, 2018.

  1. GS Spoken Here

    GS Spoken Here Well-Known Member

    830 Holley annular-discharge booster carb. # 9381. Good street/ strip car. New kit about 3 years ago. Ran it on the street. Starts good, idles good. no bog. Used it at the strip once, ran within 2 tents and 2 MPH of my regular carb. Did not spend time tuning it. As I remember it has 79 and 87 jets, with plug in rear. Do not remember what power valve is in the front. My street car combo is mild 462 in a 3500 pound GS with a S/P T400 and 4.33 gear, Runs, 7.5 in the 1/8 mile at about 94 MPH. $250.00 plus the shipping. DSC04243.JPG DSC04244.JPG DSC04247.JPG DSC04248.JPG
  2. hugger

    hugger Well-Known Member

    That's a nice hard running carb, I like the annular boosters on our cars
  3. Mart

    Mart '71 350 GS, almost stock

    20151117_094725.jpg Just wondering, Any vacuum ports or screw in air bleeds on that series? My 830 is an HP model with no vacuum ports, only air bleeds.
    Last edited: Dec 5, 2018
  4. GS Spoken Here

    GS Spoken Here Well-Known Member

    This one has no vacuum port, and no screw in air bleeds.
  5. GS Spoken Here

    GS Spoken Here Well-Known Member

    Found a fuel line an adaptors, and a choke, I think it is off the carb, but not for sure. Will include these with carb.

Share This Page